THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Hornady round nose bullets

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Hornady round nose bullets Login/Join
 
One of Us
posted
Well, I ordered my brass from them last week -- still hasn't even shipped yet, and I needed some practice ammo, and brass, so my smith ordered in the cheapest 375 Ruger he could find... Which was some kind of soft-point round nose ammo -- I guess meant for a first shot on a buff??? Not really sure -- any value in keeping some, or should I just "turn them all into brass"


And for the support of this Declaration, with a firm reliance on the protection of divine Providence, we mutually pledge to each other our Lives, our Fortunes and our sacred Honor.
 
Posts: 863 | Location: Texas | Registered: 25 January 2006Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
Personally, I'd turn them into brass and chuck them full of Northforks or A-Frames.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
While I don't dispute the choice of premiuim bullets as suggested....If you want to know more about the bullets loaded into the ammo. you purchased..I would recommend calling Hornady and asking. I've found them to be quite helpful and very forthcoming with information and suggestions.
Your experience may vary...
Cheers,
Don
 
Posts: 953 | Location: Florida | Registered: 17 March 2005Reply With Quote
One of Us
Picture of MJines
posted Hide Post
quote:
Originally posted by Don Edwards:
While I don't dispute the choice of premiuim bullets as suggested....If you want to know more about the bullets loaded into the ammo. you purchased..I would recommend calling Hornady and asking. I've found them to be quite helpful and very forthcoming with information and suggestions.
Your experience may vary...
Cheers,
Don


Just be careful and take what they say with a grain of salt. My buddy called them last year about taking the interlocks in .458 Lott to use on buffalo in Tanzania. They said, no problem, they will work fine, blah, blah, blah. He used them and while he had no problems, the recovered bullets were in horrible shape, no weight retention, lead detached from the core (there is a thread or two about this on the African Big Game tab). Then late last year Hornady pulled the interlocks and announced that they were going with something else (even though their commercials regarding the interlocks kept running on Tracks Across Africa). I guess my point is, when you are talking to someone with a vested interest in the product, just keep that fact in mind and keep your hand on your billfold. Bill Paid.


Mike
 
Posts: 21978 | Registered: 03 January 2006Reply With Quote
one of us
posted Hide Post
But what did they use when there was nothing but Hornadys, Remingtons, Winchesters and Noslers available.?????
 
Posts: 9207 | Registered: 22 November 2002Reply With Quote
one of us
Picture of Lorenzo
posted Hide Post
From 70 waterbuffs culled, near 50 were shot using the Hornady's round noses without problem.

The other 20 were shot with partitions. We saw a few failures and in both type bullets.

L
 
Posts: 3085 | Location: Uruguay - South America | Registered: 10 December 2001Reply With Quote
one of us
Picture of Lorenzo
posted Hide Post
I Have never hunted cape buffalo but if that day arrive my choice will be Barnes TSX

L
 
Posts: 3085 | Location: Uruguay - South America | Registered: 10 December 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by ireload2:
But what did they use when there was nothing but Hornadys, Remingtons, Winchesters and Noslers available.?????


As a memeber of the antique age group I would say we used them because that was what was available and very few of us got ate. I used all four of them in the late '50's, '60's and '70's. I am sure I never lost an animal due to bullet failure, now an then a recovered bullet was a disappointment, but some couldn't have looked better.

Time moves on and we probably have better availalbe today, but at a lot higher price. I guess that in the overall scheme of things the price of a bullet is inmaterial, just irritating. For instance, why should a Swift cost so much more than a Nosler or a Woodleigh so much more than a Winchester or Hornady?
 
Posts: 1700 | Location: USA | Registered: 04 January 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by MJines:
quote:
Originally posted by Don Edwards:
While I don't dispute the choice of premiuim bullets as suggested....If you want to know more about the bullets loaded into the ammo. you purchased..I would recommend calling Hornady and asking. I've found them to be quite helpful and very forthcoming with information and suggestions.
Your experience may vary...
Cheers,
Don


Just be careful and take what they say with a grain of salt. My buddy called them last year about taking the interlocks in .458 Lott to use on buffalo in Tanzania. They said, no problem, they will work fine, blah, blah, blah. He used them and while he had no problems, the recovered bullets were in horrible shape, no weight retention, lead detached from the core (there is a thread or two about this on the African Big Game tab). Then late last year Hornady pulled the interlocks and announced that they were going with something else (even though their commercials regarding the interlocks kept running on Tracks Across Africa). I guess my point is, when you are talking to someone with a vested interest in the product, just keep that fact in mind and keep your hand on your billfold. Bill Paid.


I have also shot the interlocks in 458WM and Lott, and can attest to the truthfulness of the above. I've had core/jacket separation & petals break off - and that was just on boar @ ~2050 fps. The bullets that didn't separate looked utterly horrible.

They did kill the game and the bullets are accurate as advertised.

I'm sure they're fine for deer or other thin skinned game, but you couldn't pay me to use them on anything more dangerous.
 
Posts: 5184 | Location: Michigan | Registered: 06 August 2005Reply With Quote
One of Us
posted Hide Post
Right, well, I guess I'll be "making" some 375 Ruger brass...


And for the support of this Declaration, with a firm reliance on the protection of divine Providence, we mutually pledge to each other our Lives, our Fortunes and our sacred Honor.
 
Posts: 863 | Location: Texas | Registered: 25 January 2006Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by ireload2:
But what did they use when there was nothing but Hornadys, Remingtons, Winchesters and Noslers available.?????


Mostly solids.

JPK


Free 500grains
 
Posts: 4900 | Location: Chevy Chase, Md. | Registered: 16 November 2004Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Hornady round nose bullets

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia