THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Big bore shoot in Libby, MT

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Big bore shoot in Libby, MT Login/Join
 
one of us
posted
Does anyone know if there will be a big bore shoot in Libby, MT this year (2024)? If so, what is the date ? Thanks for any info.


____________________________

.470 & 9.3X74R Chapuis'
Tikka O/U 9.3X74R
Searcy Classics 450/.400 3" & .577
C&H .375 2 1/2"
Krieghoff .500 NE
Member Dallas Safari Club
 
Posts: 1587 | Location: Eleanor, West Virginia (USA) | Registered: 20 April 2002Reply With Quote
One of Us
posted Hide Post
I'm sure there will be one after last years success. Jay Sheffield should be updating us on the date before too long.
 
Posts: 1253 | Location: Montana | Registered: 18 February 2007Reply With Quote
One of Us
posted Hide Post
Gentlemen,

Have you received any word yet regarding the 2024 Libby, Montana big bore shoot?? Please advise. Many thanks.
 
Posts: 35 | Location: Montana | Registered: 20 February 2010Reply With Quote
one of us
posted Hide Post
Still waiting for any info.


____________________________

.470 & 9.3X74R Chapuis'
Tikka O/U 9.3X74R
Searcy Classics 450/.400 3" & .577
C&H .375 2 1/2"
Krieghoff .500 NE
Member Dallas Safari Club
 
Posts: 1587 | Location: Eleanor, West Virginia (USA) | Registered: 20 April 2002Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Historically is has been the 2nd Saturday in June, IIRC


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10169 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
I tried emailing the Libby C-C, no response


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5533 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
Picture of JCS271
posted Hide Post
I wasn't ignoring you guys, I simply needed to wait to respond to several posts, and emails until I had a firm decision.

Sadly, it's time to move on and I will no longer be producing the shoot.

https://forums.accuratereloadi...4711043/m/8771093772


"The difference between adventure and disaster is preparation."
"The problem with quoting info from the internet is that you can never be sure it is accurate" Abraham Lincoln
 
Posts: 1626 | Location: Montana Territory | Registered: 27 March 2010Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Big bore shoot in Libby, MT

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia