The Accurate Reloading Forums
Decisions, decisions

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/842101818

20 February 2008, 07:06
JOE MACK
Decisions, decisions
I'm going to have a .50 caliber Ruger No.1 built. The problem is, I can't decide on the caliber. I like the performance of the .500Jeffries but by fraggle rock the ammo is expensive. I'd have to get a 5 round pack and reload those until they turned to dust. Then there's the .510Wells, .500NE, and the .500 Alaskan. I'm leaning towards the .500 Alaskan due to component price and availability. I know it'd be good bear, moose, bison, elk, and PG (at medium range) medicine but don't know about African DG at short range. I'm open to (polite) suggestions. Thanks, gents.


JOE MACK aka The .41FAN

HAVE MORE FUN AND GET THE JOB DONE WITH A .41

I am the punishment of God…
If you had not committed great sins,
God would not have sent a punishment like me upon you. (GENGHIS KHAN)



20 February 2008, 07:23
GeorgeS
.500 Nitro Express, and it's been done by someone on AR.

George


20 February 2008, 07:34
jeffeosso
500 ne, 500 ar or 510wells/500a2 ..


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
20 February 2008, 18:27
Masterifleman
From a components standpoint, the Wells would be the cheapest for brass, bullets will be the same regardless.


"I ask, sir, what is the Militia? It is the whole people. To disarm the people is the best and most effective way to enslave them" - George Mason, co-author of the Second Amendment during the Virginia convention to ratify the Constitution
20 February 2008, 19:05
congomike
Many years ago, when the British NE components were hard to find, I had built a No.1 in 50-3 1/4 Sharps. Was easily able to duplicate .500 3" and components were relatively cheap. As I recall, I used a set of 50-70 dies and adjusted them to work. All in all, did it "on the cheap" so to speak.
20 February 2008, 19:43
AfricanHunter
quote:
Originally posted by JOE MACK:
I'm going to have a .50 caliber Ruger No.1 built. The problem is, I can't decide on the caliber. I like the performance of the .500Jeffries but by fraggle rock the ammo is expensive. I'd have to get a 5 round pack and reload those until they turned to dust. Then there's the .510Wells, .500NE, and the .500 Alaskan. I'm leaning towards the .500 Alaskan due to component price and availability. I know it'd be good bear, moose, bison, elk, and PG (at medium range) medicine but don't know about African DG at short range. I'm open to (polite) suggestions. Thanks, gents.


.500 Nitro x 3 or 3.25. You can load it up hot enough to knock the pi---- out of you or anything as you have some barrel contour limits and a #1 just plain kicks in my opinion.
20 February 2008, 19:45
Rodney H.{500Jeffery}
CongoMike's suggestion is a good one, Just buy 50 basic brass or 50-140 Sharps and duplicate 500 NE loads. There is also the 510 nitro express {510 Echols Express} at 3.245 in length. I prefer the heavy rim on the 50 basic brass better than the 500 Nitro's flanged, either choice would be a good one. Rodney.