THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Need some loading advice for my new Rigby

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Need some loading advice for my new Rigby Login/Join
 
<ppk1911>
posted
awwright y'all, i took the plunge and ordered up a new ruger m77 in 416 rigby-- should get it tomorrow!! also got a variX-III 1.5x5 (heavy duplex) to top it off.

also ordered some RCBS dies (redding only offers them on a custom basis), Bell brass (they were all out of Norma), some 300gr and 350gr X bullets, 340gr woodleigh PRPs, and 350gr A-Frames...

anybody got any proven loads they'd care to share? i've got 3 days until our whitetail season opens-- nothing like waiting till the last minute. [Big Grin]

also, does anybody know where i can get a nice "traditional" leather sling to complete the express rifle look? all my slings are some composite-gel-filled-new-age-synthetic-type, that just wouldn't look right! [Eek!]

thanks for any input
patrick

[ 11-23-2002, 02:42: Message edited by: ppk1911 ]
 
Reply With Quote
<ppk1911>
posted
oops, i just found the post "416 Rigby Pet Loads" that looks like a good starting point....
 
Reply With Quote
<GeorgeInNePa>
posted
I'm using the O'Conner load. 105grs H4831 (I'm using Short Cut) Behind a 400gr bullet. In this case a 400gr Hornady Soft. I'm getting Sub-MOA out to 300 yards. There's no arguing with 2.5" groups at 300yards. 100 yard groups you can cover with a quarter and get back change!

I have 3 boxes of Speer 400gr TBBC bullets that I want to try next. No time to get it done before deer season. I'll just have to shoot 1 or 2 with the round nose bullets.
 
Reply With Quote
one of us
Picture of Robgunbuilder
posted Hide Post
My pet load for the .416 Rigby in a M77 is 100 grs of Rl-22 behind a 410 woodleigh. It hits 2435 fps and has MOA accuracy. A lot of African critters have given their all to that load.-Rob
 
Posts: 6314 | Location: Las Vegas,NV | Registered: 10 January 2001Reply With Quote
<Terry P>
posted
I loaded 108gr. of Rel. 22 with 350gr. Barnes X and it was very accurate and a good all round load.
I think I tried 99gr. of the same powder with 400gr. Hornady's...softs and solids. That too was an accurate load but everything I tried shot well out of the Ruger.
Look at this site for a leather sling. I got the 1 1/2" long sling that he makes for the express type rifles with barrel band swivel.
http://www.murraycustomleather.com/press.htm
Good luck with your new rifle,
Terry
 
Reply With Quote
one of us
posted Hide Post
HI,

TERRY P, what was the fps with the 108 grains of REL with the 350 barns X. I will get a 416 cz550 soon and I also would like to try the X 350 grain, so I am interested in the load for that bullet and the fps.Thanks,Kev
 
Posts: 1002 | Location: ALASKA, USA | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Need some loading advice for my new Rigby

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia