THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Anyone have CZ 3 pos. factory safety?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Anyone have CZ 3 pos. factory safety? Login/Join
 
<JoeR>
posted
CZ-USA says for additional $65, they will install a 3 position safety on the 550 magnum that I wish to order in 416 Rigby. Does anypne have any experience with this safety? Is it similar to the M70 safety? Does it leave any gap in the right rear stock? BTW, they do say the stock shown on their website is the only one available for the 550 magnum. Thanks.
 
Reply With Quote
KurtC
one of us
posted Hide Post
Many of the current 550's have a 3 position safety. It looks the same as the 2 position rocker type. Mine was on a full stock 9.3x62. You may want to clarify with them if it is the rocker type or a m-70 wing type.

------------------

 
Posts: 2036 | Location: Roebling, NJ 08554 | Registered: 20 January 2002Reply With Quote
fredj338
one of us
Picture of fredj338
posted Hide Post
PME inc. used to make a M70 style safety/shroud for the ZKK 600-602. They may make one for the 550.
PME (360)748-3743. They are in Washington
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
<Hunting Max>
posted
quote:
Originally posted by fredj338:
PME inc. used to make a M70 style safety/shroud for the ZKK 600-602. They may make one for the 550.
PME (360)748-3743. They are in Washington

PME makes definetly (http://www.precisemetalsmithing.com/3%20Pos%20safety.htm) a M70 style safety for the 550. The price is US$ 193,97. I have it installed on my 550 Magnum. It is worth every cent!

------------------
Guns can save lives - maybe your�s.
Max

 
Reply With Quote
Daydreamer
one of us
posted Hide Post
Have already ordered my CZ550, but due the nice wood of on in stock I had to take one the vendor already had, so couldn't make it 3 position for the safety.

Considering a M70 style saftey, but found something interesting for the Mauser 98 - the "Seehuber" safety. This is similar to the new Blaser and Krieghof safteys - you can carry the gun with an uncocked bolt - then you cock and shoot.

What do you think about this safety system on a DGR?
(hope the picture is visible)

Franz

[This message has been edited by Daydreamer (edited 04-18-2002).]

[This message has been edited by Daydreamer (edited 04-18-2002).]

 
Posts: 202 | Location: Vienna/Austria | Registered: 04 October 2001Reply With Quote
D Humbarger
one of us
Picture of D Humbarger
posted Hide Post
DayDreamer the added weight is going to slow down the lock time. That probably doesn't matter on a DGR though.

------------------
Doug Humbarger
NRA Life member

 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
Daydreamer
one of us
posted Hide Post
quote:
Originally posted by Bear Claw:
DayDreamer the added weight is going to slow down the lock time. That probably doesn't matter on a DGR though.

Doesn't matter - will have 3 kick-stops and lead everywhere possible, to get to 20lbs for comfortable shooting anyway!!!!!

That .223 kicks a lot, you know!

 
Posts: 202 | Location: Vienna/Austria | Registered: 04 October 2001Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Anyone have CZ 3 pos. factory safety?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia