THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Can someone identify these bullets?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Can someone identify these bullets? Login/Join
 
One of Us
posted
Caliber .375, recovered weight 190 to 220 gr. Seem to be a copper jacketed solid, with a copper core. Pieces of jacket recovered.

Found lying on the ground by the target in the quarry where we sight our rifles, close to camp, so they probably come from a client's rifle.

But good solids do not lie in the dirt after being shot... And certainly should not look like that!

Anyone has an idea of what they could be?

 
Posts: 1252 | Location: East Africa | Registered: 14 November 2006Reply With Quote
Moderator
posted Hide Post
The hole in the base reminds me of Swift A-Frames, but those have a bonded lead core.

George


 
Posts: 14623 | Location: San Antonio, TX | Registered: 22 May 2001Reply With Quote
One of Us
Picture of CCMDoc
posted Hide Post
I'm with George - SAF if a soft point. The solid that comes to mind that has a hole in the bottom is the old Speer African Grand Slam with Tungsten core.


NRA Lifer; DSC Lifer; SCI member; DRSS; AR member since November 9 2003

Don't Save the best for last, the smile for later or the "Thanks" for tomorow
 
Posts: 3465 | Location: In the Shadow of Griffin&Howe | Registered: 24 November 2007Reply With Quote
One of Us
posted Hide Post
I am quite certain that its Swift A-Frames.. I have seen that look of them many many times when shot at high vel into game or when they are found in the dirt bank on the shooting range..
 
Posts: 873 | Location: Denmark | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
Swift A Frames you can tell by the bulge behind the expansion, and the hole in the rear and oh my the seem to have slipped the core!! naughty.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42321 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
Picture of ozhunter
posted Hide Post
Yes, they do look like Swift A Frames and if shot into the side of a Quarry then I'd say that's not a bad result of a fast moving Soft bullet.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
One of Us
posted Hide Post
Checked more closely, and what I mistook for a copper core is actually the copper partition, "punched" out by the lead core behind. And the red of the core seen through the hole in the base is just the red of the laterite dust that got embedded on it... I had not thought of a partitioned soft. Thanks.
 
Posts: 1252 | Location: East Africa | Registered: 14 November 2006Reply With Quote
One of Us
Picture of Mike Brooks
posted Hide Post
quote:
Originally posted by Philip A.:
But good solids do not lie in the dirt after being shot..


Ever heard of the wind blowing the dirt away fro the bullets or rain washing it away? LOL, we find 600 Nitro Woodys laying on top of the dirt after winter snows leave.
Still shootable too!


NRA Life
ASSRA Life
DRSS

Today's Quote:
Give a man a fish and he eats for a day. Give a man a welfare check, a free cell phone with free monthly minutes, food stamps, section 8 housing, a forty ounce malt liquor, a crack pipe and some Air Jordan's and he votes Democrat for a lifetime.
 
Posts: 4096 | Location: Cherkasy Ukraine  | Registered: 19 November 2005Reply With Quote
one of us
posted Hide Post
Same with arrow heads, when it rains you start finding them...nothing stays burried forever, it all surfaces sooner or later, even aunt Matilda, will surface sometime in the future I suspect.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42321 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
posted Hide Post
Those are Swift A Frames. The front lead core is bonded to the jacket.
The lead in the rear of the bullet is not bonded to the jacket.
Sometimes when shooting into rocks the rear core will pop out.

I have never had that happen on the bullets I have recovered from cape buff or eland.


DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Can someone identify these bullets?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia