THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    .600 Overkill barrel update
Page 1 2 

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
.600 Overkill barrel update Login/Join
 
Robgunbuilder
one of us
Picture of Robgunbuilder
posted Hide Post
Barrels are all ordered, Dies are being made and brass orders are being compiled. Progress is being made.-Rob
 
Posts: 6314 | Location: Las Vegas,NV | Registered: 10 January 2001Reply With Quote
Erik Fryman
one of us
posted Hide Post
I must have missed out somehow. Is it still to late to order a barrel. Should I just call Pac-Nor and place an order?.
 
Posts: 355 | Location: Anchorage, Alaska | Registered: 09 November 2001Reply With Quote
<KBGuns>
posted
quote:
Originally posted by 500grains:

Originally posted by KBGuns:

Is there a reason nesesitating a belt on a .620 calibur BMG based case, or is it just there to show people it is 'powerful'?

In my knowledge(admittedly limited) I can't see a need for it. There would be plenty sholder to headspace on.

KristoferThe 620 OK case is not a BMG case. It is a new design that lacks a shoulder and therefore needs a belt to headspace on.
500grains, if you look up in the thread there, I am conversing with RGB about a BMG based 600 cal.

Kristofer
 
Reply With Quote
KevinNY
one of us
posted Hide Post
You guys are up for a challenge I see. More power to ya, just remember Saeeds 577 videos.
 
Posts: 1541 | Location: NC | Registered: 10 June 2002Reply With Quote
Robgunbuilder
one of us
Picture of Robgunbuilder
posted Hide Post
Guys- It's not yet too late. We have seven barrels ordered ( 1 extra) and 8 die sets. Next week we concentrate on Brass. So far we are anticipating about 700 cases. If you want in e-mail me ASAP. Honestly figure on about $1000 for the pre-chambered/threaded barrel/3 Die reloading set and 100 cases from Horneber. We have lined up two good gunsmiths and possibly a CZ550/602 atock duplicator.-Rob
 
Posts: 6314 | Location: Las Vegas,NV | Registered: 10 January 2001Reply With Quote
<GeorgeInNePa>
posted
Rob, my god in heaven, don't post the expected total! If my wife should ever log on here...

[Wink]
 
Reply With Quote
500grains
One of Us
posted Hide Post
KBguns,

Oh, I thought you were commenting on the .620 Overkill.
 
Posts: 18352 | Location: Salt Lake City, Utah USA | Registered: 20 April 2002Reply With Quote
KMuleinAK
one of us
posted Hide Post
RGB - I am tired of those PBJ sandwiches; in the general ballpark, what's this gonna cost in the common configuration for the whole enchilada? who are the two gunsmiths ? Thanks - KMule
 
Posts: 1300 | Location: Alaska.USA | Registered: 15 January 2002Reply With Quote
Robgunbuilder
one of us
Picture of Robgunbuilder
posted Hide Post
KmuleinAK- Hard to say exactly. Anywhere from about 1K up to 3K depending on how much work you farm out and what parts you have already. Both AHR and John Ricks will work on this project for those who need some gunsmithing done.-Rob
 
Posts: 6314 | Location: Las Vegas,NV | Registered: 10 January 2001Reply With Quote
Paul H
Moderator
Picture of Paul H
posted Hide Post
quote:
Originally posted by KMuleinAK:
RGB - I am tired of those PBJ sandwiches; in the general ballpark, what's this gonna cost in the common configuration for the whole enchilada? who are the two gunsmiths ? Thanks - KMule
If the barrel brass dies are ~$1k, figure $550 for the action, ~$300 for bolt, barrel and rail work, maybe more depending on the amount of rail work, and the stock depends on what you want, ie plastic or wood. Figure $200 for the iron sights installed. So, $2-3k out the door on the low end.

It certainly won't cost any more then other large bore customs, and is the least exspensive way to get something really big [Big Grin] Too bad I don't have the spare coin for one [Frown]
 
Posts: 7213 | Location: Alaska | Registered: 27 February 2001Reply With Quote
500grains
One of Us
posted Hide Post
barrel: $350
dies: $150
brass: $500
action: $550
sights: $100 to $200
gunsmithing: $500
stock: $1000
bullets: $2 apiece
 
Posts: 18352 | Location: Salt Lake City, Utah USA | Registered: 20 April 2002Reply With Quote
  Powered by Social Strata Page 1 2  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    .600 Overkill barrel update

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia