Removed. Email for zipfile.

[ 11-11-2003, 05:51: Message edited by: Nickudu ]

BTT - One Time

Nickudu--Got to love big bores--Here is picture
my Enfield chambered for my 458 HE.Also have
458HE in a Ruger 77, and an Enfield that will be rebored from .510 to .550 HE.These are all
test guns, and nothing fancy.Ed.

Ed,
Are you smuggling those cartridges in from Havana?

Nickudu-My cases do look like big cigars.Sure
would like to get enough folks interested in
re-chambering 458's to get a run of brass made for 458HE..Ed

Ed,
What are the spec's on the case, again? I can't find my notes.

Nickudu--It is 3.45 in long and .527 at the base
ahead of belt. Belt is .543 and rim is .532. and
Will work with any H&H bolt face.I built brass
from 450 NE cases.Have a 150 left and I wore out 70 in 1800 rounds of load developement.The 458 WIN, Lott, and Ackley can be rechambered just by running in the reamer.As well as barrel blanks.
Good for 9000 ft lbs if you want.Here is picture of two flanking a 458Win.Ed.