THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Load data 375 H&H 300 gr FMJ

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Load data 375 H&H 300 gr FMJ Login/Join
 
One of Us
posted
Does anyone have any load data they are willing to share for Woodleigh 300 gr FMJ in 375 H&H? Powders I have available here are IMR 4320, Hodgdon Varget, and Hogdon H380. I might be able to get some other types in town but selection is not great. I saw something once published by woodleigh at 69 grains but lost my notes. I'm not looking for super high velocity something on the order of 2500 fps would match my other rounds. My 270 grain swifts clock 2530. Thanks for any assistance. Paul
 
Posts: 78 | Location: Alaska  | Registered: 22 April 2015Reply With Quote
One of Us
posted Hide Post
I use 66.5 grains of IMR 4064 in WW cases with Fed 215 primers in all of my 300 grain loads. It yields an honest 2450 fps out of my 25 inch pre 64 Win 70. Hornady RN, DGX, DGS; Win Silvertip; Nosler Partitons

I use 70 grains in my 260 gn Nosler Partition loads that yields 2710 fps for comparison to your data.


PA Bear Hunter, NRA Benefactor
 
Posts: 1633 | Location: Potter County, Pennsylvania | Registered: 22 June 2005Reply With Quote
one of us
Picture of JBrown
posted Hide Post
I had really good luck with 78 grains of W760 and the Woodleigh 300 graing FMJ.


Jason

"You're not hard-core, unless you live hard-core."
_______________________

Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt.

Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry
Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure.

-Jason Brown
 
Posts: 6842 | Location: Nome, Alaska(formerly SW Wyoming) | Registered: 22 December 2003Reply With Quote
One of Us
posted Hide Post
77-78 of 760 or H414 which is the same thing and just about any bullet is a fast track to .375 accuracy. Speeds are about what you're looking for.
 
Posts: 1928 | Location: Saskatchewan, Canada | Registered: 30 November 2006Reply With Quote
One of Us
posted Hide Post
Thanks, guys. I appreciate the feedback. Paul
 
Posts: 78 | Location: Alaska  | Registered: 22 April 2015Reply With Quote
One of Us
Picture of subsailor74
posted Hide Post
My best load for a .375H&H solid is:

Remington Brass
300 Gr Woodleigh FMJ
76.0gr IMR 4831
CCI Magnum Rifle Primer

This load shoots the same point of impact in my Dakota bolt rifle as my 300 gr Barnes X Triple Shock load where I use 67.0gr of IMR 4064 vice the IMR 4831 for the solid load.
 
Posts: 1594 | Location: Virginia | Registered: 29 September 2011Reply With Quote
One of Us
posted Hide Post
Thanks! I appreciate the info! Paul
 
Posts: 78 | Location: Alaska  | Registered: 22 April 2015Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Load data 375 H&H 300 gr FMJ

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia