Has anyone used this brass?
What did you think?


Thanks

Give it a try and let us know if it works. I use Norma brass in my gun.-Rob

Same as BeLL -- made from the same original equipment

Thanks for the replies. I used to use Norma
but it is thinner than the BeLL and I would get
case separations after a couple of reloadings
in my Searcy.

quote:

Originally posted by rcasto:
Thanks for the replies. I used to use Norma
but it is thinner than the BeLL and I would get
case separations after a couple of reloadings
in my Searcy.

I have had the same problem in my Searcy 470. Norma costs way too much for this cheep skate.

465H&H

quote:

I have had the same problem in my Searcy 470. Norma costs way too much for this cheep skate.

465H&H

465 - How many reloadings are you getting from BeLL brass?

I have gotten 8-10 loads from my Bell 470 brass and no signs of any trouble. I also use it in my 450/400 and 465 and have had excellant results in these as well.

quote:

Originally posted by 470Evans:
I have gotten 8-10 loads from my Bell 470 brass and no signs of any trouble. I also use it in my 450/400 and 465 and have had excellant results in these as well.

I haven't kept track but I know it is very few, like 2 or 3. I have reloaded Bell brass for years in my 465 and it keeps ticking. I must have reloaded those cases at least 10 times with full loads and I still haven't lost a case.

465H&H

Hello

I have used Jamison 450 3 1/4" full loads with 500 grain bullet and reduced loads with 5744, no problems, 4 rounds of loads.

I bought the 470 NE brass but have not loaded any yet. Just got some of those FREE 475 bullets from Doug. I will be loading some soon !

I have reloaded the Nickle FC stuff twice, no problems with the FC brass.

Nitro450exp