The Accurate Reloading Forums
The legend lives on

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/638104435

04 September 2006, 19:09
.366torque
The legend lives on
Sure looks close to the GMA. But this is a genuine new Mauser.

http://www.mauserwaffen.de/t4/Specifications.81.0.html?&L=1
04 September 2006, 19:23
fla3006
Those have been available since 1998. They are neat but the finish, checkering, polish, etc. is about like a CZ, not worth the $10K retail price IMO. Here's one with a few extra options: MAUSER


NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
04 September 2006, 19:23
jeffeosso
not exactly genuine, but sure nice..

Sauer owns the "small arms" license from mauser, as Mauser is 100% on military guns.

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
04 September 2006, 19:38
.366torque
quote:
Originally posted by fla3006:
Those have been available since 1998. They are neat but the finish, checkering, polish, etc. is about like a CZ, not worth the $10K retail price IMO. Here's one with a few extra options: MAUSER


Nice scope set up! cheers
Look ma! No rings!!!
04 September 2006, 19:46
JV
quote:
Originally posted by .366torque:
Nice scope set up! cheers
Look ma! No rings!!!



Very common in Europe
04 September 2006, 19:51
.366torque
I think it should be presented a little more here. I like it!!!
05 September 2006, 10:47
.366torque
JV, in all honesty, how strong and reliable when compared to a good strong set of rings? The scope looks heavier, how much so?
I'm asking because I want to know what benefits, besides looks, can be expected.
I'm truelly interested in the design but have no desire to rush out without some fore knowledge. I bought too many regrettables already!
Thanks
05 September 2006, 11:13
Stu C
quote:
Originally posted by .366torque:
JV, in all honesty, how strong and reliable when compared to a good strong set of rings? The scope looks heavier, how much so?
I'm asking because I want to know what benefits, besides looks, can be expected.
I'm truelly interested in the design but have no desire to rush out without some fore knowledge. I bought too many regrettables already!
Thanks


Each of the big three European scope manufacturers offer rail mounted scopes. Here's what Swarovski says about theirs

New Swarovski rifle scopes with the innovative SR mounting rail (Swarovski Rail) herald a genuine revolution in the precision and the mounting of rifle scopes. This unique meshing system will prevent any movement whatsoever of the rifle scope, which may result from recoil forces – even with big game and wild boar calibers. With the new rail, it is now no longer necessary to drill any holes when fitting the rifle scope. As a result, it is now possible to not only mount the riflescope much closer to the rifle, but it can also be easily changed at any time.



Swarovski Rail Mount Scopes


Hope this helps.

- stu
05 September 2006, 11:22
bobby van der Putten
Scope is 20g heavier, mounts are a touch lower, although on this picture it could have been mounted lower.
Basically more reliable than rings, if you do not put some glue on the ring tightening screws. Main advantage is guaranteed horizontal setting.
05 September 2006, 19:24
El Deguello
quote:
But this is a genuine new Mauser.

It sure is!


"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
05 September 2006, 19:35
MacD37
The Mauser 98 Magnum rifle is very nice, but Brialey's price of $13,500.oo is a little out of line!


....Mac >>>===(x)===> MacD37, ...and DUGABOY1
DRSS Charter member
"If I die today, I've had a life well spent, for I've been to see the Elephant, and smelled the smoke of Africa!"~ME 1982

Hands of Old Elmer Keith

05 September 2006, 22:24
.366torque
Stu C & bobby van der Putten, thank you!


Leupold & Burris, the coffee purculator is boiling over on the stove!! Wake up already!!!!!
06 September 2006, 03:52
ALF
/
06 September 2006, 21:52
Paolo9,5x73
At approx. 10K I'm thinking Reimer Johannsen. Heym 'Express' comes to mind if I want to pay less. The name Mauser went away when those old factory buildings were demolished. CRYBABY
06 September 2006, 22:01
Wink
Are guns made with Brevex actions considered to be Mausers?


_________________________________

AR, where the hopeless, hysterical hypochondriacs of history become the nattering nabobs of negativisim.
07 September 2006, 03:11
Paolo9,5x73
Yes, good Polak + Frenchie combo, much like Nick Copernicus and Madame Curie. thumb The M400 is slightly larger than the original Oberndorf Magnum Mauser. Wink
07 September 2006, 17:59
Wink
Paolo, I didn't know about the Polish connection, give us some background.


_________________________________

AR, where the hopeless, hysterical hypochondriacs of history become the nattering nabobs of negativisim.
07 September 2006, 20:08
GeorgeS
The important question here is, is it available in left-hand configuration? Big Grin

George


07 September 2006, 23:52
fla3006
quote:
Wink: I didn't know about the Polish connection, give us some background.


In 1950, a Mr. Polanski purchased machinery from the French State Arsenal MAS and started making magnum Mauser actions. Polanski had been an engineer at the Polish Arms factory at Radom and emigrated to France after the war. Brevexes are slightly larger than M-20 Oberndorfs and came in two variations, the M-300 with 375 bolt face and M-400 with 416 bolt face. The bolt face diameters are the only difference. 400-800 actions were made in the 1950s, imported by Tradewinds into the USA. (from Jon Speed's Mauser book, page 312)

Brevex on top, FN on bottom:




NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
08 September 2006, 00:30
Safarischorsch
quote:
Originally posted by GeorgeS:
The important question here is, is it available in left-hand configuration? Big Grin

George



Yes!