THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Big bore puzzle posted on reloading forum

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Big bore puzzle posted on reloading forum Login/Join
 
one of us
posted
I figured I would ask for help with this on this forum. I have a fired round (range pick up) that was fired in something (not the correct gun) that left the neck opened to .327 I have no idea what it could have been. Perhaps some of you may be able to figure it out. Data and pics on Reloading Forum. Thanks in advance The topic is "Anyone up for a Puzzle" , JB
 
Posts: 104 | Location: Roanoke, VA , USA | Registered: 20 March 2002Reply With Quote
one of us
Picture of 470 Mbogo
posted Hide Post
How about an 8mm which is .323 bullet diameter but once fired the case would open and allow a new .323 bullet to fall in. This is provided the .327 is an inside case mouth measurement.
Take care
470 Mbogo
 
Posts: 1247 | Location: Sechelt B.C. | Registered: 22 May 2002Reply With Quote
one of us
posted Hide Post
Probably a 8x57 or a re-chambered 8x57 from a slop (battle) chambered military rifle....they have excessive necks to allow for dirt, mud, ice etc.
 
Posts: 42232 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Big bore puzzle posted on reloading forum

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia