THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Could someone with Quickload do me a favor?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Could someone with Quickload do me a favor? Login/Join
 
One of Us
posted
I don't have a chronograph. This is a dissadvantage, but not too critical since I don't load to the max.

I was wondering if someone could give me the projected velocity and pressure of the following loads:

.458WM
530gr cast bullet - 1.305" long
loaded OAL: 3.15"
case length: 2.487"
bullet in case: .63"

50gr IMR-4895
55gr IMR-4895
60gr IMR-4895

Thanks for any help!
Bob
 
Posts: 102 | Registered: 28 April 2004Reply With Quote
one of us
Picture of Lar45
posted Hide Post
You didn't say what length of barrel, so I put in 22"
50gn 1550fps 24.5ksi
55gn 1707fps 32ksi
60gn 1862fps 41.6ksi


Lar45

White Label Lube Co.
www.lsstuff.com
Carnauba Red high speed cast bullet lube.
 
Posts: 2924 | Location: Arkansas | Registered: 23 December 2002Reply With Quote
One of Us
posted Hide Post
Thanks so much. This is a big help!

BTW - Its a 24" barrel (Ruger #1) so I'll just assume a tad more velocity.

Bob.
 
Posts: 102 | Registered: 28 April 2004Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Could someone with Quickload do me a favor?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia