I think Warne makes them for the CZ, but I do not know if they are lower than Talley.

Hunter Jim. It would be good if you could measure from the bottom of the ring bore to the top of the dove tail area or some other reference point so that I can compare it to Talleys.

cr500,

I have a set of Warne rings that I can measure if that will help.

jim

Thanks , I will measure the Talleys when I get to the gunsmith next, unless someone has some handy at the moment.

cr500,

I Warne QD ring I have measures .440" from the bottom of the ring bore to the top of the dovetail cut of the ring.

The package says they are M for medium. As I recall they were the lowest ring that Warne catalogued at that time (10 years ago).

jim