The Accurate Reloading Forums
Bronse bristle brushes in a damascus barrel?...

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/53410508

03 October 2003, 11:52
<BMG>
Bronse bristle brushes in a damascus barrel?...
I have a damascus barreled shotgun and was wondering if the bronse bristle brushes will hurt the barrel. I've been putting the cleaning rod tipped with a bristle brush on my drill and removing the leadding/fouling with it. It removes the leadding/fouling well (especially with some Kroil in the barrel) and while I wouldn't give it a second thought on a modern steel barrel, I was wondering if I'm 'eating away' at my damascus barrel at all or if the bronse brisle brush is harmless to my barrel.

Thanks,
BMG
04 October 2003, 00:58
GrizzlyClaus
Never hurt it. Use the same method with my L.C.Smith 10.
04 October 2003, 04:04
GeorgeS
Bronze is much softer than even 'Damascus' steel. Don't worry about it.

George