THE ACCURATERELOADING.COM BIG BORE FORUMS


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Forend Tip Login/Join
 
one of us
Picture of Sevens
posted
It seems that many of the big bores are accented with forend tips on the stock. Does the forend tip serve any purpose beyond aesthetic? Also, I notice that the majority are ebony, some have cherry wood, and a few have horn. What else do people use for forend tips? Hippo tusks, rhino toenail, stone?

Thanks,


____________________________

If you died tomorrow, what would you have done today ...

2018 Zimbabwe - Tuskless w/ Nengasha Safaris
2011 Mozambique - Buffalo w/ Mashambanzou Safaris
 
Posts: 2789 | Location: Dallas, TX | Registered: 27 January 2004Reply With Quote
One of Us
Picture of Michael Robinson
posted Hide Post
Purely aesthetic. I like ebony. Folks used to use horn, but it tends to crack and shrink.


Mike

Wilderness is my cathedral, and hunting is my prayer.
 
Posts: 13954 | Location: New England | Registered: 06 June 2003Reply With Quote
one of us
Picture of JBrown
posted Hide Post
quote:
Does the forend tip serve any purpose beyond aesthetic?


I respected Finn Aagaard above all others and he said that the FE tip served no purpose other than aesthetics. This is one of the few things on which I would differ with him.

I think a FE tip made from a wood, such as ebony, that is harder than the stock itself serves to protect the end grain on the forend from moisture and shows less wear from normal bumps.

I am no expert, but I can't imagine using horn on a hunting rifle. Some do seem to like it so it must not be as bad as I think.


Jason

"You're not hard-core, unless you live hard-core."
_______________________

Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt.

Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry
Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure.

-Jason Brown
 
Posts: 6842 | Location: Nome, Alaska(formerly SW Wyoming) | Registered: 22 December 2003Reply With Quote
One of Us
Picture of ozhunter
posted Hide Post
I have found Ebony a little brittle and susceptible to cracking.
I do have rifles with Rosewood, Buff horn and Ebony fore end's though.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by ozhunter:
I have found Ebony a little brittle and susceptible to cracking.
I do have rifles with Rosewood, Buff horn and Ebony fore end's though.



Buff horn is very tradiional, can you come up with it in Australia? Haven't had this for many years..might be an export import problem?
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
one of us
Picture of Sevens
posted Hide Post
quote:
Originally posted by Duane Wiebe:
Buff horn is very tradiional, can you come up with it in Australia?


You could use water buffalo horn. Plenty of those in Australia.


____________________________

If you died tomorrow, what would you have done today ...

2018 Zimbabwe - Tuskless w/ Nengasha Safaris
2011 Mozambique - Buffalo w/ Mashambanzou Safaris
 
Posts: 2789 | Location: Dallas, TX | Registered: 27 January 2004Reply With Quote
one of us
Picture of Scrollcutter
posted Hide Post
I bought an entire buff horn from a knife makers supply a few years back.

Is there a problem getting horn now?


Roger Kehr
Kehr Engraving Company
(360)456-0831
 
Posts: 1634 | Location: Washington State | Registered: 29 December 2002Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
Not that I'm aware of unless it is very recent. Almost all of the imported horn is water buffalo from SE Asia. Most of it comes from the Phillipines but they may collect it from many sources. I have read in a few sources that most of the pre-war guns were water buffalo too.

Texas Knife Supply usually has a 55 gallon barrel or two of whole horns at their shop.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11143 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
One of Us
Picture of cmfic1
posted Hide Post
How 'bout African Blackwood? Pros/ Cons?

Would any one have a pic or two of what this stuff looks like?


Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel
 
Posts: 977 | Location: Alberta, Canada. | Registered: 10 May 2005Reply With Quote
one of us
Picture of Scrollcutter
posted Hide Post
tiggertate,

I'm sure that's where I got it.


Roger Kehr
Kehr Engraving Company
(360)456-0831
 
Posts: 1634 | Location: Washington State | Registered: 29 December 2002Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
Blackwood looks a lot like ebony except you can see brown fibers in the grain. depending on the piece, it can be very subtle. It is very attractive and somewhat cheaper than solid black ebony.

Roger, I think you referred me to Texas Knife Supply long ago when we first started talking about my single shot (still in the works, BTW).


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11143 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by Duane Wiebe:
quote:
Originally posted by ozhunter:
I have found Ebony a little brittle and susceptible to cracking.
I do have rifles with Rosewood, Buff horn and Ebony fore end's though.



Buff horn is very tradiional, can you come up with it in Australia? Haven't had this for many years..might be an export import problem?

My Smith has some old Aus Buff horn floating around.
There must be tons of the stuff floating around up in the Northern Territory.
Would be worth talking to some of the Aus hunting outfitters at the show.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
one of us
Picture of husky
posted Hide Post
I used Buffalo horn on my .505 Gibbs, very much because we found a lion killed Dugga boy while out hunting buffalo, and brought a piece of the horn with me back home.

So, every time I use the .505, the fore end tip reminds me about that buffalo hunt! thumb

We will see how long it lasts..




 
Posts: 1134 | Location: Sweden | Registered: 28 December 2003Reply With Quote
one of us
Picture of Sevens
posted Hide Post
Husky, I saw the pictures of your 505. It looks really nice.


____________________________

If you died tomorrow, what would you have done today ...

2018 Zimbabwe - Tuskless w/ Nengasha Safaris
2011 Mozambique - Buffalo w/ Mashambanzou Safaris
 
Posts: 2789 | Location: Dallas, TX | Registered: 27 January 2004Reply With Quote
One of Us
posted Hide Post
A question: Ive come across horn buttplates that were worm eaten? I've heard that a short stint in the microwave prevents the problem....any experience?
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by Duane Wiebe:
A question: Ive come across horn buttplates that were worm eaten? I've heard that a short stint in the microwave prevents the problem....any experience?

Nuke em, sounds like a good plan.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
one of us
posted Hide Post
With my 338 RUM I had my light fall down and on its way it chiped a peace of that Forend tip off. So I had my gunsmith make the other side of that tip look like the side that got chipped and he smothed the side that got chiped also. It looks a little different but not much.
 
Posts: 2209 | Location: Delaware | Registered: 20 December 2002Reply With Quote
One of Us
Picture of zimbabwe
posted Hide Post
I have used Vermillion and Amaranth on quite a few rifles. I like the contrast but it's not everyones cup of tea. I think tips are a very personal like or dislike both in whether to have one and if so what wood. Definitely DON'T like horn. No real reason, just don't like it.


SCI Life Member
NRA Patron Life Member
DRSS
 
Posts: 2786 | Location: Green Valley,Az | Registered: 04 January 2005Reply With Quote
One of Us
Picture of chuck375
posted Hide Post
Pictures we need pictures!

Smiler

Chuck


Regards,

Chuck



"There's a saying in prize fighting, everyone's got a plan until they get hit"

Michael Douglas "The Ghost And The Darkness"
 
Posts: 4818 | Location: Colorado Springs | Registered: 01 January 2008Reply With Quote
one of us
Picture of husky
posted Hide Post
Foreend tip of my .505 Gibbs:





 
Posts: 1134 | Location: Sweden | Registered: 28 December 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia