Go | New | Find | Notify | Tools | Reply |
One of Us |
Mine curiously does not have a barrel band, though I would like one. I also cannot hot shit with it with the open sights. Probally operator error on my part. | |||
|
One of Us |
Interesting history lesson. I remember the old Interarms ads. My first centerfire rifle when I was a kid was a m93 Spanish Mauser in 7x57mm I bought in a pawnshop. I suppose this is how it was imported into the US. Roger ___________________________ I'm a trophy hunter - until something better comes along. *we band of 45-70ers* | |||
|
One of Us |
OK, I said when I shot this new Whitworth, I'd report back. It came without a scope, and looks like it never had one. I want to leave it that way too. It is my 5th 375 H&H, so I don't need another scoped 375, to say nothing for the four 375 Rugers in my safe. This rifle will be open sighted only. So, I was hoping the sights were 'on' for my eyes. I shot a three shot group at 50 yards, standing off hand with a tight sling. 2" group, in the bullseye area, at 12:00. Wahooooooooooo!!! I really love this Whitworth! | |||
|
One of Us |
I had forgotten what a heavier 375 felt like in the recoil dept. My 375 Rugers weigh 7.75 lbs. and my Dakota Safari weighs 8.5 lbs. Yep, the recoil of this Whitworth was tame! I have a Ruger RSM in 375 H&H, and with scope it weighs about 10.5 lbs. It was a pussycat to shoot too, but I retired it a number of years ago when I got my Dakota. While pleasant to shoot, I guess I still prefer carrying a lighter rifle all day while hunting. To each their own, as they say. | |||
|
One of Us |
One thing I forgot to mention on my first outing at the range with my Whitworth. At each shot, my trigger finger felt like it had been cut. It was not cut, but the pain was sharp. There is no burr on the trigger, but the right side edge feels like sharp metal. I also noticed that the trigger face is groved, unlike any of my other rifles. Have any of you Whitworth owning persons out there ever experienced this also? Do any of you gunsmith type people have an idea of how to correct that, without an amateur like myself buggering it up? I am not even close to being a gunsmith and will probably have my gunsmith look at it, but I was just wondering what collective wisdom there was out there among the AR intelligentsia. Can the edge be 'sanded down' a bit? Would that require rebluing? Thanks in advance for any advice! | |||
|
one of us |
Keep in mind the Blue Book was published for businesses and gun show table buyers..They sure tend to low ball some nice guns with that Blue book...Guess it depends on if your a buyer or seller...Buyer be ware.. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
One of Us |
I'd expect that if the trigger is black or blue then it might be blued, if you know what I mean. I would certainly be inclined to take to it with a half-round file, finishing with some wet-and-dry sandpaper. Then get some paste blue (G96 has worked well for me) and refinish it. I find that repeated applications tend to make the job darker. | |||
|
one of us |
Surefire, Pretty common in triggers particularly the ones with striation...I take a dremmel tool and smooth them out and round the edges them polish and blue..I like smooth triggers as opposed to checkered or straight cut...I like the milsurp mauser trigger itself, but not the milsurp trigger unless its had a proper trigger job.. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
One of Us |
Thanks guys for the suggestions! | |||
|
one of us |
Drop in a Timney #301 Featherweight De Luxe FD M98 FN and be done ! Will be a $ 112 and cents well spent ! | |||
|
Powered by Social Strata | Page 1 2 |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia