The Accurate Reloading Forums
NEW .825 G&S Biggest Baddest BIG Bore Ever
28 October 2010, 04:30
blackbearhunterNEW .825 G&S Biggest Baddest BIG Bore Ever
Now this right here is funny i dont care who you R
Enjoy
http://www.chuckhawks.com/825_magnum.htm28 October 2010, 04:48
sroseIts got Michael458 written all over it if it will fit in a model 70.
28 October 2010, 04:53
blackbearhunterYou aint just whistling dixie,Michael458 and safarikid and robgunbuilder and bigdoggy and Jeffe will be in hog heaven
28 October 2010, 16:53
big_footThat's not a big bore...THIS is a BIG BORE!!
______________________
"The heroes are dead but not all the dead are heroes."
28 October 2010, 19:38
michael458Damn if we could fit that cartridge in a B&M Super Short rifle, 16 inch barrel that would be the ticket!
Of course, would have to make some proper solids for it and a Non Con.
A good BBW #13 about 1200 grs ought to do.
Let's see, I have a dremel tool and a bastard file around here somewhere, where is my hammer? See if we can fit this in a Super Short?
HEH
M
http://www.b-mriflesandcartridges.com/default.htmlThe New Word is "Non-Conventional", add "Conventional" to the Endangered Species List!
Live Outside The Box of "Conventional Wisdom"
I do Not Own Any Part of Any Bullet Company, I am not in the Employ Of Any Bullet Company. I do not represent, own stock, nor do I receive any proceeds, or monies from ANY BULLET COMPANY. I am not in the bullet business, and have no Bullets to sell to you, nor anyone else.
28 October 2010, 20:20
CowboyCSquote:
# Bullet diameter - .823"
# Case material- "High tension" steel
# Maximum case length - 2.2105" (nominal case length 2.210")
# Rim diameter - 0.925"
# Rim thickness - 0.095"
# Head diameter - 0.865"
# Neck diameter - 0.860"
# Overall cartridge length - 2.850"
# Barrel twist - 1 turn in 18"
# Primer type - Large Rifle Magnum
# Maximum average pressure - 82,500 psi
82,500psi in basically an 8 bore hand gun(7-8 pounds maybe?)...
Good luck with that, make sure you have your buddy post pictures of the first(only) shot.
Colin
28 October 2010, 21:49
CCMDocquote:
Originally posted by CowboyCS:
82,500psi in basically an 8 bore hand gun(7-8 pounds maybe?)...
Good luck with that, make sure you have your buddy post pictures of the first(only) shot.
Colin
Please
DON'T post pictures - it would be more bloodshed and carnage than even I could take.
NRA Lifer; DSC Lifer; SCI member; DRSS; AR member since November 9 2003
Don't Save the best for last, the smile for later or the "Thanks" for tomorow
28 October 2010, 22:01
drewhenrytntI was thinking this is just a shortened 7-bore.
Thoughts?
We Band of Bubbas
N.R.A Life Member
TDR Cummins Power All The Way
Certified member of the Whompers Club
28 October 2010, 22:41
MacifejThink you guys have been had ...
28 October 2010, 22:47
jeffeossothe "shells" shown are lighters ...
i have at least one, Hogkiller gave it to me, about a million years ago
28 October 2010, 23:02
michael458 http://www.b-mriflesandcartridges.com/default.htmlThe New Word is "Non-Conventional", add "Conventional" to the Endangered Species List!
Live Outside The Box of "Conventional Wisdom"
I do Not Own Any Part of Any Bullet Company, I am not in the Employ Of Any Bullet Company. I do not represent, own stock, nor do I receive any proceeds, or monies from ANY BULLET COMPANY. I am not in the bullet business, and have no Bullets to sell to you, nor anyone else.
29 October 2010, 00:34
MikeBurkequote:
Originally posted by michael458:
Damn if we could fit that cartridge in a B&M Super Short rifle, 16 inch barrel that would be the ticket!
Of course, would have to make some proper solids for it and a Non Con.
A good BBW #13 about 1200 grs ought to do.
Let's see, I have a dremel tool and a bastard file around here somewhere, where is my hammer? See if we can fit this in a Super Short?
HEH
M
Michael,
You will need a CZ action with its square bridge. No way a Winchester would be strong enough. 82500PSI
29 October 2010, 00:40
CCMDocquote:
Originally posted by Macifej:
Think you guys have been had ...
I've seen that article a bunch of times and it is clearly a tongue-in-cheek poke at all of us on this particular forum. All in good fun - and if it was real, a few of us would line up to get one.
NRA Lifer; DSC Lifer; SCI member; DRSS; AR member since November 9 2003
Don't Save the best for last, the smile for later or the "Thanks" for tomorow
29 October 2010, 00:46
michael458quote:
Originally posted by Mike70560:
Michael,
You will need a CZ action with its square bridge. No way a Winchester would be strong enough. 82500PSI
No man, I got some loads now that Sam swears is over 80000? HEH...but they are really only 67000!
CZ---Hmmmmm, can we scrape of the CZ Part and scratch Winchester on it?
If we can do that, we good to go!
HEH
M
http://www.b-mriflesandcartridges.com/default.htmlThe New Word is "Non-Conventional", add "Conventional" to the Endangered Species List!
Live Outside The Box of "Conventional Wisdom"
I do Not Own Any Part of Any Bullet Company, I am not in the Employ Of Any Bullet Company. I do not represent, own stock, nor do I receive any proceeds, or monies from ANY BULLET COMPANY. I am not in the bullet business, and have no Bullets to sell to you, nor anyone else.
29 October 2010, 01:09
peterdkquote:
Originally posted by michael458:
CZ---Hmmmmm, can we scrape of the CZ Part and scratch Winchester on it?
If we can do that, we good to go!
HEH
M
doc M
why would you want to turn a silk purse into a sows ear
peter
29 October 2010, 01:35
michael458quote:
Originally posted by peterdk:
doc M
why would you want to turn a silk purse into a sows ear
peter
HERESY!!! Blasphemy!!!!! Paganism!!!!!!
http://www.b-mriflesandcartridges.com/default.htmlThe New Word is "Non-Conventional", add "Conventional" to the Endangered Species List!
Live Outside The Box of "Conventional Wisdom"
I do Not Own Any Part of Any Bullet Company, I am not in the Employ Of Any Bullet Company. I do not represent, own stock, nor do I receive any proceeds, or monies from ANY BULLET COMPANY. I am not in the bullet business, and have no Bullets to sell to you, nor anyone else.
29 October 2010, 01:57
peterdkyes i know michael, but all is not lost, the chinese will proberly own it soon and start to show you guy's how to make true quality guns
actually you might think about getting a patent for your double rifle system, it might be the new win double soon
just kidding mate, the chinese only buy good american company's with black numbers on the bottom line.
how is your day by the way
peter
29 October 2010, 02:12
CowboyCSquote:
Originally posted by CCMDoc:
quote:
Originally posted by Macifej:
Think you guys have been had ...
I've seen that article a bunch of times and it is clearly a tongue-in-cheek poke at all of us on this particular forum. All in good fun - and if it was real, a few of us would line up to get one.
If money and time are no object, I can make it a reality. All you have to do is provide the Money, I'll provide the time.
Colin
29 October 2010, 03:30
GrandpasezThat case is a pipsqueak. A 'for real' pistol would be
8bore from one of our bored out NEFs, with pistol
grip(which you can get), barrel cut to max pistol
length, 200 bucks to gov, and you'd have a
10,000 ft lbs pistol. In a handy dandy, easy
to carry, split your noggin open when fired...package.Ed
MZEE WA SIKU
29 October 2010, 04:30
CowboyCSWell Hubel, you could always step up to the 2 Bore pistol.
Colin
29 October 2010, 05:16
p dog shooterJust you all remember how the 600 over kill got started here.
somebody might just start making caseing then some one well build a gun up.
