The Accurate Reloading Forums
The best bullet for the 375 H&H:

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/437105295

25 December 2006, 00:01
ALF
The best bullet for the 375 H&H:
?
25 December 2006, 00:19
Mickey1
Would you remove the primer and the powder or just leave it as an exploding bullet?
25 December 2006, 00:27
Harris
thumb What a great idea! Poor Man's Trophy bonded bear claw.


The price of knowledge is great but the price of ignorance is even greater.
25 December 2006, 00:33
Raffica
more info please


Big holes bleed more!
25 December 2006, 01:31
Hog Killer
Yep, looked at the same idea for the .458s. Just turn off the rim of a 44 mag brass. For the 470s, 45acp or 45 Colt(-rim).

Keith


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
25 December 2006, 01:39
JABS
???
25 December 2006, 02:39
ALF
?
25 December 2006, 04:00
Strut10
Incredible!! Eeker


Founder....the OTPG
25 December 2006, 05:18
duikerman
If it's OK with you, I'll stick to my A-Frames.
25 December 2006, 05:48
Pegleg
Someone has way too much time on their hands to do stuff like this. Why not do penetration test turning pointed soft points around and shooting them backwards.


The only easy day is yesterday!
25 December 2006, 06:41
gumboot458
Pegleg I,ve done that lots..... Results inconclusive....execpt it doesn,t make the 300 win mag penetrate deep enough for me to keep the rifle


.If it can,t be grown , its gotta be mined ....
27 December 2006, 04:12
gumboot458
270 gr tsx moly coated@ 2700 fps.


.If it can,t be grown , its gotta be mined ....
27 December 2006, 04:39
Hog Killer
Looks like a great and cheap, plinking and pig bullet to me. Might give it a try when I get my 375 H&H built.

Hog Killer


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
27 December 2006, 04:40
jeffeosso
Keith,
I got the cnc mill back up and running...

new .475 bullet mould?

jeffe


#dumptrump

opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
27 December 2006, 04:51
Hog Killer
jeffe, might as well do the whole family, .375", .458", and .475".

Could use the 40S&W/10m/m for .423", if any of the "Bubbas" gets that bore size.

Hog Killer


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
27 December 2006, 05:43
George Semel
Well, necessity is the mother of invention. I heard tell of an Elephant poacher that would shoot an elephant then dig out the handmade solid and reload it. He would fill the 375 case with power taken from a 7.62x39 AK round. Shot an Old ZKK 602 or so that was the story. Heck I knew a guy that tried to shoot 44 mags out of a 410 double Barrel shotgun, he figuired that he could have a double rifle that way. It takes all kinds.
27 December 2006, 07:19
billinthewild
quote:
Originally posted by Pegleg:
Someone has way too much time on their hands to do stuff like this. Why not do penetration test turning pointed soft points around and shooting them backwards.


Amen.....and, why? thumbdown


"When you play, play hard; when you work, don't play at all."
Theodore Roosevelt