The Accurate Reloading Forums
Does anybody know

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/4321014481

17 January 2013, 17:22
foxhound
Does anybody know
Does anyone know if it is possible, and if so, worth the trouble to rethread a Ruger 77 barrel for a Mauser 98? Figure it never hurts to ask.
thanks
Rick


DRSS
17 January 2013, 18:05
Jim Kobe
An excersize in futility. You will need to cut off about 5/8" from the chamber end and start all over. Ruger barrels are probably not the best second rate barrel out there.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

17 January 2013, 18:28
Biebs
The Master has spoken!
17 January 2013, 21:38
foxhound
Thanks much!!! that is what I need to know.


DRSS