Does anyone have load data for the 350gr ttsx using reloader 15?

Surprising link doesn't list Re15.

http://www.barnesbullets.com/w...7/07/416-Rem-Mag.pdf

Barnes manual #3 does for FB should be adaptable. About 2500 fps mv from my 20" 1:14 barrel with 350gr TTSX/Re15. Mild pressure acceptable accuracy.

quote:

Originally posted by 4sixteen:
Surprising link doesn't list Re15.

http://www.barnesbullets.com/w...7/07/416-Rem-Mag.pdf

Barnes manual #3 does for FB should be adaptable. About 2500 fps mv from my 20" 1:14 barrel with 350gr TTSX/Re15. Mild pressure acceptable accuracy.

Hopefully I can find data for rl15 i have alot of it lol

quote:

Hopefully I can find data for rl15 i have alot of it lol

I have found IMR4064 data really close

you can call the and ask or if it was me I would start at 75 grains and work up from there.good luck and have fun

quote:

Originally posted by hydehunter:
you can call the and ask or if it was me I would start at 75 grains and work up from there.good luck and have fun

I called and got the answer of 79gr min at 2500 to 84gr max at 2670

Not the same bullet but my 416 rem shoots 370 Northforks at 2490 with 78gr of RL15 so the starting load they gave you should be plenty safe

Without digging through my old files, the suggestions of 79 to 84 worked for me with RL-15 and it was my chosen powder hands down..

I recall that my favorite load was a 400 gr. or 450 gr bullet at 2300 to 2400 FPS was my chosen load, and I had some leeway between guns, but this load of 12400 worked in all the 416s I owned over the years and it killed well..I never saw the need for more velocity than 2400 FPS, although I could get more velocity when working up loads, but bullet performance on Buffalo etc always seemed perfect at 2400 FPS. so I stuck with that.