Hi Gentlemen,
I ordered a CZ 458 Lott with the upgraded wood today. It is do in in about three weeks. I would like to have some ammo ready when it arrives. Does anybody have a favorite load? I've had good luck with reloader powder on my other big bores. Do any of you use RL in your Lott? And does anybody know where I can obtain some brass? Midway has it on back order at the present time. Thanks for your time & info. Regards Mike

i duplicated the hornady factory load with 71grains of reloader7 and a 500grain barnes super solid. I see boxes of brass on gunbroker alot.
dean

There are alot of variances in Lott chambers, so you should be for-warned before using others data.

In my previous Lott, the best loads were:

350 gr speer hot core, seated to the rear canalure, 76.0 gr Reloader 7, 2400 fps.
350 gr hornady rn, 80.0 gr Reloader 7, 2525 fps
500 gr hornady rn sp, 87.0 gr Reloader 15, 2280 fps

I did try RL 7 w/ a 450 gr X bullet, and got very high pressures at only 2200 fps, as I recall. It seems to me that RL 7 is too fast of a powder for bullets heavier than 400gr.

I still need to get brass and dies for my new Lott, as well as getting the chrony fixed.

I was shooting my load out of a ruger#1 but was seeing no signs of pressure but ???

Dean

they chrono 2261 to 2268fps.

Tonto, your No.1 probably had a longer throat than his particular rifle. Different dimensions also.

80 grs. 4320 with a 500 br Hornady 2200fps.
Have loaded hotter, but settled on this load. Similar to the old nitro-express velocity with 500 gr. bullets.

As Paul H said , there are differences in Lott chamber specs. Is there any "standard" chamber length or standard freebore? I was after a Lott reamer with freebore on the shorter side as I will not be loading for absolute top velocity and would be shooting a "Lott" more lighter 350gn bullets than full power 500gn loads. What is the standard freebore length?

I use 80 to 85 grains of 4320 for 2200-2300FPS with Hornady RN soft points and solids. I tried 3031 for the lighter bullets but it seemed too bulky. RL-15 works wonderfully in my 375 H&H and 416 Remington. I'll try that next.

Congratulations Mike!!! It looks you are sold on those CZ rifles. You can also creat some "reduced" loads using H4350 and H4831. Please tell us more about your new CZ 458 Lott when you have it. Thanks.

Quote:

---

Hi Gentlemen,
I ordered a CZ 458 Lott with the upgraded wood today. It is do in in about three weeks. I would like to have some ammo ready when it arrives. Does anybody have a favorite load? I've had good luck with reloader powder on my other big bores. Do any of you use RL in your Lott? And does anybody know where I can obtain some brass? Midway has it on back order at the present time. Thanks for your time & info. Regards Mike

---