THE ACCURATERELOADING.COM BIG BORE FORUMS


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Action for .375 Ruger??? Login/Join
 
One of Us
posted
I have the chance to purchase a nice gun in .338 Win. mag, but do not need that caliber. My question is. Can this same action be used for a .375 Ruger or a .416/.375 Ruger? I wish to only re-barrel and go, but not sure about the bolt face and magazine accepting the cartridge???
 
Posts: 158 | Location: Satsuma, Alabama | Registered: 11 February 2004Reply With Quote
one of us
Picture of Fjold
posted Hide Post
The bolt face and magazine length are no problems. It may take a little tweaking of the feed lips/rails because the ruger cartridge is a little fatter through the shoulder but the rest of the gun should be good to go.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

 
Posts: 12828 | Location: Kentucky, USA | Registered: 30 December 2002Reply With Quote
One of Us
Picture of gumboot458
posted Hide Post
My Ruger 77 mk 2 338 actions fed 375 ruger factory ammo perfectly ....


.If it can,t be grown , its gotta be mined ....
 
Posts: 3445 | Location: Copper River Valley , Prudhoe Bay , and other interesting locales | Registered: 19 November 2006Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
you can just rebarrel and go if you check the feeding first before you do the rebarrel.

In all likelyhood it'll be just fine!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
I would say probably...I just built one on a 98 Mauser in .416 Ruger and had to do some magazine work on it..Dennis Olson did the metal work and I made the stock. I was told if I wanted a drop box that a .338 box would work but I opted for the std Mauser bottom metal..It feeds 110%...


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42321 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
Sounds like I'm in business. Thanks to all that responded.
 
Posts: 158 | Location: Satsuma, Alabama | Registered: 11 February 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia