THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Comments on Sauer 202 Takedown

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Comments on Sauer 202 Takedown Login/Join
 
one of us
posted
I am not familiar with (have not had the chance to fondle), but am intrigued by, the Sauer 202 Takedown. Can those of you that have an opinion comment on the quality/characteristics of this firearm when chambered in medium/big bore calibers (.375; .416)?

Brad
 
Posts: 184 | Location: Southern Arizona | Registered: 22 September 2003Reply With Quote
one of us
posted Hide Post
.
 
Posts: 7857 | Registered: 16 August 2000Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
Alf, do you know if the take-down is maintaining the same accuracy standard as the regular 202?


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11143 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
one of us
posted Hide Post
I thought there were two "takedowns"? One has the quick takedown capability, no tools required, the other has a long rod down the middle and needs a tool. The quick version has a two piece foreend, the other does not. Hope this makes sense.
Peter.


Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;
 
Posts: 10515 | Location: Jacksonville, Florida | Registered: 09 January 2004Reply With Quote
one of us
posted Hide Post
.
 
Posts: 7857 | Registered: 16 August 2000Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
quote:
Originally posted by ALF:
Tiggertate:

The take down i'm referring to is the new model with the quick release button that releases the forend and you simply slide the barrel out.

It is as accurate as the older standard model 202's.

The secret lies in the "auto headspacing" of the Sauer bolting system. When you turn the bolt into battery it bolts the bolt directly to the barrel and in doing so pulls the barrel down on to the bolt with the correct headspacing. The barrel is also free floating as the forend is locked down to action frame via the plate that seperates the two parts of the forestock.

In terms of accuracy these rifles are very well put together and only leave the factory once proven accurate by actually shooting them. If they are in any way flawed the rifle gets trashed. I visited the Sauer factory some yars ago and actually saw the whole proccess.

Now this genre of rifle may not be every man's cup of tea but if you have a limited option in hardware you are allowed to own as guys now do in South Africa this really becomes a very attractive option.

I have been shooting Sauers for some time now and they are very contrary to what my taste in guns are.

I mean they are modern, employ the use of plastic on the magazines, they have detachable mags that in reality are quite helpful up here in BC where we hunt from ATV's and river boats. But the very best feature of all that cannot be beat is how accurate they are.

With factory RWS ammo my Sauers completely obviate any need to reload, I cannot improve on the accuracy these rifles give with RWS ammo!


I'm glad to know that. I was curious because even though you have the same lock up bolt-to-barrel, you have a third mechanical connection in the front-half to back-half. I was concerned that the scope/receiver assembly might not re-align as precisely with the barrel each cycle.

Peter, the original 200/202 rifles are more accurately called "switch barrel" as opposed to "take-down" but I suppose at the end of the day that is splitting hairs. One requires a tool and one does not. Both fit in the same size case.

I'm a Mauser guy but I think the design and quality to the 200/202 negate a lot of the push-feed negatives. The only thing I would ask that they do on a DGR is come up with some sort of clip release lock to prevent an accidental loss of the clip during a difficult stalk. That button is too eay to push.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11143 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
new member
posted Hide Post
In a recent issue of Sports Afield, a hunter on Safari used a take-down 202 in .375. The rifle worked fine, however the fine African dust worked into the take-down mechanism, which apparently due to the extremely tight tolerances caused the mechanism to completely seize. The hunter was absolutely unable to break-down the rifle, and had to borrow a full size rifle case to get the rifle back his home in Europe. Food for thought.
 
Posts: 13 | Registered: 16 September 2004Reply With Quote
one of us
posted Hide Post
Looking at Guns America, there is quite a difference in price between the two types. The newer takedown 202 goes for about $4K or more in 375H&H, while the older models (takedown with a tool!) go for under $2K. Just FWIW. I came very close to buying the older model a few weeks ago. It had nice wood.
Peter.


Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;
 
Posts: 10515 | Location: Jacksonville, Florida | Registered: 09 January 2004Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Comments on Sauer 202 Takedown

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia