How could this have happened?Anyone know of this(Robgunbuilder!),we may need to "acquire" one soon!(Oh,my poor shoulder)

http://en.wikipedia.org/wiki/.950_JDJ

http://www.securityarms.com/20010315/galleryfiles/2200/2289.htm

REEEEEEEEAAALLLLY old news Tom.

No! You can't make one work at 10 pounds!!

I think George S. who posts here has fired the thing.

J d Jones had several of these made about 10 years ago. McMillan does not make the action to handle this cartridge anymore. only 7 or 8 were made years ago. Kid this gun gave off about38,600 ft.lbs of energy and fired a 3600 grain bullet at almost 2200 ft/sec. The reason you would never have one is that they weighed between 85 and 110 lbs. WAY TOO HEAVY for your tastes!!

Ohh Tom could shave it down to a 16" 10 lbs sporter

Safarikid, just get Anzio to build you a 10lbs version of this http://www.anzioironworks.com/20MM-TAKE-DOWN-RIFLE.htm
1600gr bullet at 3300fps, approx 600gr powder.
A light gun should have enough recoil, even for you!

Yes, I fired that behemoth back in 1997. It is one impressive sumbitch!

There is also a .750JDJ, built for the same customer.

George

Yes, I've known about it and a few other 20mm varients made by a bunch of guys for a long Time. I deceided my niche was to stick to the max that could be shoulder fired and luged around . I have a shell holder action I made that will hold a 20mm. Probably the borchardt will also.-Rob

Holy cow look at the barrel and brake on that thing!