Getting rid of the dinky 12ga barrel and putting on the heavy 12ga.

That is one of John's 750gr slugs stuck into the bore.Ed.

That is a 12GA FH Pacnor barrel I am putting on the Sav 210.
It measure 1.4 at muzzle to 1.5 in at action shoulder.
I will get it threaded in few days, and then get it inleted, and thre recoil shoulders set up in the stock.I got the three barrels from Pacnor that they said didn't turn out great, when they ran the first set of 12ga FH tooling.Two 30 inchers that were rifled and 34 incher that was only bored.One looked almost perfect to me.I will use the 34 incher to build a 4 bore.The roughest one of the three, one of the 30s, I honed out a bit and smoothed up the rough lands, and turned down outside for the 210. I will sell the other 30 incher to anyone wanting to build a 12GA FH. It came in very good condition as far as I could tell, I was able to put one of John's grooved solids through it, leaving two grooves on bullet so there was no chance of sticking it, and there was no tight spots, and it measures .729 groove diameter after I got it through.
In fact it was better than a 458 Shaw barrel I got years ago.It will make someone a great 12 GA barrel.
It is still the 2.25 inch dia so plenty to make what ever profile you want. Also still have the rifled barrel from
Savage that we are replacing, for sale.ED.

WOW!!

what's the total weight?
jeffe

Jeff- the gun will be about 25 lbs.Barrel is 11 and 7 lbs add to stock, a 5 lb heavy stock, etc. Now that 12ga 2.25
in diameter barrel I have for somebody who wants to build one weighs 31 lbs. Ed.

I am posting picture of action and bolt, I am trying to find someone to make a heavier thicker action using the Savage bolt and carrier, for some future experiments and ideas.Need an action with about a 1.35 in barrel thread, 50% longer barrel threads, and action about a 1.7 in diameter.And a heavier bolt head with bigger lugs for full pressure BMG cases sizes.Also the whole action, bolt carrier and all could be scaled up, to use for 4 bore I think.And use the Savage trigger and sear setup.Ed