THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Upstate NY Gunsmith for DGR

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Upstate NY Gunsmith for DGR Login/Join
 
massad
new member
posted
Hi to all,
I'm looking for any information on a Gunsmith in or around the Syracuse area to work on my Ruger RSM. Want to Replace the recoil pad by someone who will know what he (she Smiler knows what they're doing as well as maybe smooth out the axn etc. Any thoughts?...
Thanx in advance....Mike
 
Posts: 16 | Location: new york state | Registered: 15 March 2006Reply With Quote
GeorgeS
Moderator
posted Hide Post
Mike,

I can't help with a gunsmith recommendation, but installing a new recoil pad is basic stuff. If you have a Gander Mountain near you, they would certainly be able to handle that (just leave the stock).

Depending upon where the action is rough, you may be able smooth the action yourself somewhat by using a very fine grade abrasive paste.

What sort of roughness do you have with that RSM?

George


 
Posts: 14623 | Location: San Antonio, TX | Registered: 22 May 2001Reply With Quote
CCMDoc
One of Us
Picture of CCMDoc
posted Hide Post
quote:
Originally posted by GeorgeS:
Mike,

I can't help with a gunsmith recommendation, but installing a new recoil pad is basic stuff. If you have a Gander Mountain near you, they would certainly be able to handle that (just leave the stock).

Depending upon where the action is rough, you may be able smooth the action yourself somewhat by using a very fine grade abrasive paste.

What sort of roughness do you have with that RSM?

George


There is a Gander Mountain off of Rt 17 near Middletown (I think it is exit 120) but that is a bit of a haul from Syracuse.
To me, visiting there or Cabelas - and I just learned there is on off of 95, exit 58 in CT - is always worth a drive. Sorta the Toys R Us for us.


NRA Lifer; DSC Lifer; SCI member; DRSS; AR member since November 9 2003

Don't Save the best for last, the smile for later or the "Thanks" for tomorow
 
Posts: 3465 | Location: In the Shadow of Griffin&Howe | Registered: 24 November 2007Reply With Quote
buckeyeshooter
one of us
Picture of buckeyeshooter
posted Hide Post
Turnbull restoration is just south of Rochester. They do gret work!
 
Posts: 5725 | Location: Ohio | Registered: 02 April 2003Reply With Quote
taylorj
One of Us
posted Hide Post
There is a Gander Mountain off Exit 30 on 81 north right out of Syracuse. Go down the ramp, then go straight ahead on the road directly in front of you - only about 1/4th mile ahead.
 
Posts: 97 | Registered: 18 July 2004Reply With Quote
K20350
One of Us
Picture of K20350
posted Hide Post
The last time I talked to a gunsmith at Gander Mountain we were talking about shotguns and he was telling us about how "Those remington870's are always are always tearing gas rings" dancing
 
Posts: 445 | Location: Michigan | Registered: 02 January 2006Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Upstate NY Gunsmith for DGR

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia