The Accurate Reloading Forums
CZ factory big bore ammunition...

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/3541045901

16 May 2009, 06:59
Idaho Sharpshooter
CZ factory big bore ammunition...
CZ's newest catalog shows ammunition for 404J, 500Shuler, and 505 Gibbs. Has anybody shot any yet? How close to published velocities is it?

Rich
Buff Killer
16 May 2009, 07:14
eurocentric
Rich I own the 404 and 500 Safari Classic rifles. The 500 ammo fired and chambered nicely. The 404 ammo I could not close the bolt on, I had to ship back the entire load I purchased from CZ and they refunded the money. The ammo is actually made by A-Square for CZ, the whole ordeal took weeks to be resolved. When I attempted to make a second order of the 404J ammo, they informed me they no longer sell the ammo and recommended Norma and a couple of other custom ammo makers. Great rifles.

quote:
Originally posted by Idaho Sharpshooter:
CZ's newest catalog shows ammunition for 404J, 500Shuler, and 505 Gibbs. Has anybody shot any yet? How close to published velocities is it?

Rich
Buff Killer

16 May 2009, 08:11
RIP
Agree with eurocentric.
Have been told by local dealer that CZ stopped messing with the A-Square-made ammo.
Had to return a bunch of it to my local dealer when it first came out "years" ago.
The "CZ/A-Square" .505 Gibbs ammo would not chamber in the CZ .505 Gibbs rifle.
The local dealer returned his to CZ.
I sent samples of the defective brass to Jamison for his analysis when he was getting set up to make the first batch of .505 Gibbs ... "years" ago.

A-Square had the gall to ask me to send some of it back to them, from whence it had come. Roll Eyes
16 May 2009, 21:46
BNagel
The case dimensions of A-Square ".375 Weatherby Magnum" offerings were so completely off (ten years ago or so) that the only thing "A-Square" I now value is the reloading book. Change of hands, new management, whatever seems to have made no difference .


_______________________


17 May 2009, 16:38
fourbore
I am stuck with two boxes of oversize 505 Gibbs from a-square. Cabela wont take it back. Shoulder too far forward and bolt wont close. JUNK! I glad I learned when I did. The very same ammo returnd by CZ for being out of spec, then dumped by A_square on Cabelas. Sleeze.

Too bad consumer reports does not include gun related products. How do these guys stay in business.

We could use a vendor rating feedback system here on PM.
21 May 2009, 20:12
eurocentric
I agree, the Manual is great reading and loaded with info: Thats the only thing left of value at a-square
22 May 2009, 02:38
Idaho Sharpshooter
I'd be happy with a box of the brass...

Rich
Buff Killer
22 May 2009, 03:21
DuggaBoye
It is Too bad.

I have some of the early A-Square 500NE and it is great, some of the later is not.

Met Art when he was first really starting the commercial expansion, nice guy then, haven't talked in years now.


DuggaBoye-O
NRA-Life
Whittington-Life
TSRA-Life
DRSS
DSC
HSC
SCI
22 May 2009, 18:38
BNagel
People cussed Bertram brass, but that A-Square stuff was noticeably softer than BELL or any other I've run into. Still, if nobody else offers a particular caliber/case...


_______________________


22 May 2009, 23:16
Idaho Sharpshooter
Dugga Boy,

saw him last year at SHOT Show in Vegas. He looked like he would field dress about 235.

Rich
Buff Killer