THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Got My first Real Big Bore -

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Got My first Real Big Bore - Login/Join
 
One of Us
Picture of Mike_Dettorre
posted
Okay got a Ruger RSM in 416 Rigby...

Need scope ring suggestions for a 30 mm tube scope?


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10181 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
one of us
posted Hide Post
Mike,

Not sure if you are aware, but Ruger does sell 30mm rings if you need that diameter....

Catalog# D71M30MM is the part number for the medium height rings...

PS: I've been very impressed with my .375 RSM, it's a great rifle. Hope you enjoy yours...


.22 LR Ruger M77/22
30-06 Ruger M77/MkII
.375 H&H Ruger RSM
 
Posts: 863 | Location: Mtns of the Desert Southwest, USA | Registered: 26 February 2004Reply With Quote
One of Us
Picture of Skinner.
posted Hide Post
Warne makes a QD set for Rugers in 30 mm,

Warne QD's at Natchez Shooters Supply
 
Posts: 4516 | Registered: 14 January 2005Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Mike_Dettorre:
Okay got a Ruger RSM in 416 Rigby...

Need scope ring suggestions for a 30 mm tube scope?


Call Ruger and tell them you need the 30mm rings and they'll swap them, maybe even send you the larger rings at no cost and not ask for the stock ones back. But they might ask you to send the original ones back. "Just depends", it doesn't hurt to be nice and polite and be amazed that they'll do that for you.

Oh, and help out the next guy who calls them by thanking them at least three times clap
 
Posts: 626 | Location: The soggy side of Washington State | Registered: 13 July 2003Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Got My first Real Big Bore -

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia