I never got to examine one closely. I can see how to make the barrel insert for a single shot .22, but how do you get the firing pin to strike the rim, rather than the center?
Any ideas or information would be welcome.
Don
They are still around, here is a web site for MCA, an outfit that makes a lot of them:
http://www.mcace.com/rifleinserts.html
I have some friends using inserts from them.
jim dodd
------------------
"if you are to busy to
hunt, you are too busy."
I was thinking this would be a great idea for safari practice too.
Canuck
Thanks for the link. Do you know if they are accurate enough for actual practice?
Canuck
I suspect they are the "cartridge replacement" type with a 1-2 inch barrel, but I can't find a picture.
HunterJim, Thanks for the link. I will check them out.
Don
[This message has been edited by Don G (edited 04-08-2002).]
I shoot a .22 rimfire an aweful lot. I use it while out on my shoting days to let the centerfires cool down and to give me trigger control work with out a pounding. My .22 is a very nice rifle built for me by a guy I met on these forums. "E4E". Based on a Ruger m77 which has an identical 3 position safety to the model 70. I thought this idea was to good to pass up for teaching my daughter to shoot. Anyway he put on a big heavy ported Bull Barrel. It's some kind of bench rest super barrel he had on hand. He added a custom laminated stock and bedding as well as trigger work and everything else you can do to a .22 rimfire. It shoot's one holers at 50-75 yards with cheap "milk carton ammo"
I still remember the first time I shot that rifle after he sent it to me. I had been shooting the 375HH for about 45 minutes and decided to cool it down. I dragged out the .22 and shot it off of sandbags to see how accurate it was. When I pulled the trigger, I assumed a misfire? I cycled the bold and the same thing happend again, however this time I realized the shell had no bullet in it! I looked down range and saw a hole( fifty yard target) So I shot again and I actually did hear a faint "pop" but saw no hole? With earplugs and head phones it was hard to detect the gun going off. There was ZERO rifle movement. I walked down and sure enough only one hole. I marked the target with a black marker in three places. Went back and shot all three black spots. The rifle actually does not move, shoots every bullet into the same hole and is so quite it's hard to tell it fired.
Then back to the 375HH for more shooting. That .22 is a great tool for concentrating on your shooting skills and trigger control. I credit much of my ability to shoot well to this day from three things.
#1 my Dad's instructions with the Sheridan Air rifle which had willimas Peep sights, as a very young boy. Pumping that thing 10 times for each shot made you concentrate on every trigger pull. You also rarely took risky shots becasue it would require repumping again! As I got older the pumping was easier, but when your 8 years old it's a big job!
Learning to hunt flying birds with a shotgun for 6-7 years before I ever owned a centerfire rifle.
And finally the millions of rounds of .22 rimfire I have shot in my life.
If they infact make a .458 sleeve and it's easy to install and remove, that is one clever and truely functional idea! jj
And finally
------------------
It seems there is never enough time to do things right, but always enough time to do them over
Most recently he is using a .30-40 Krag in a 16 ga. No reports on game yet.
I am either going to try these cartridge inserts, or develop a lead bullet load for my .308 and small antelope.
jim dodd
------------------
"if you are to busy to
hunt, you are too busy."
Don
My buddy knows the guy who makes them, I'll see if I can get a quicker repsonse.