The Accurate Reloading Forums
Reduced loads for 375 H&H and 458 Lott

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/271109086

01 June 2007, 17:45
Shikaribabu
Reduced loads for 375 H&H and 458 Lott
Folks need some help. Am in search for reduced loads (for practice) with my 375 HH and 458 Lott.
Have cooked up some for my 375HH using AA 5744 and Hornady 225grain Spire points. Any help with 375HH loads using Hornady or Barnes 300 grain would be appreciated. Same for 458Lott in 500 grain.
01 June 2007, 19:52
dsiteman
Hello,
Pull up Hodgdon powder co's web site and you will find a very complete listing of most any load you can think of for the cartridges you are after. Glad to see Hodgdon do this for lots of data for all to share and no need to go buy a book every so often other than for the technical data found in the manuals. Good luck.
01 June 2007, 19:58
aktoklat
Are you looking for light plinking loads to practise with? If so use 26-36 grains of AA5744 with a dacron filler on top of the powder for the 375 H&H. Use 34.5-40.5 grs of AA5744 in the 458 with a dacron filler. The velocity for the 375 H&H should run from 1330-1725 fps and the 458 Load should run from 1425- 1623 fps. Highly recommend using the dacron fller on top to keep the powder at the bottom of the case. These loads were found in the Lyman #48 Manual. I personally use 28 grs of Unique with the 300 & 350 Barnes X's in the 416 Rigby for plinking loads, works great! Don't forget about the dacron filler, good luck and shooting!


Focus on the leading edge!
01 June 2007, 22:46
John in SC
http://stevespages.com/375_1_300.html
02 June 2007, 17:16
Shikaribabu
aktoklat:
Thanks. Where do you get your dacron fillers from?
05 June 2007, 19:11
MichiganScott
dacron filler=pillow stuffing. Available at your local "mart".
08 June 2007, 21:36
Paul H
If you want reduced loads for the 458 lott, use 350 gr bullets. Recoil is dramatically reduced. I used 76-80 gr of RL-7 for 2400-2500 fps, recoil is on par with the 375 H&H.


__________________________________________________
The AR series of rounds, ridding the world of 7mm rem mags, one gun at a time.
08 June 2007, 22:11
degoins
you dont need fillers for 5744


DRSS
08 June 2007, 22:21
pagris
Shikaribabu: IMR has published load date for SR4759 for the 375 H&H - a great reduced-load powder that has worked well for me in several cartridges. The load data is available on the Hodgdon web site that dsiteman referred to:

http://data.hodgdon.com/cartridge_load.asp


Thanks, Dad, for taking me into the Great Outdoors.
08 June 2007, 22:33
Atkinson
Why not just shoot your 06. same thing...

I believe in shooting full house loads in my big bores, as one needs to immune himself of their recoil and the old stuff about reduced loads helping one adapt is hooey IMO...

If I wanted to be able to shoot a 600 Nitro, then I would practice with a 700 Nitro, then when I shot my 600 I would say, "now thats a pussy cat to shoot"...Makes since to me. Smiler


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
09 June 2007, 17:33
Shikaribabu
Guys
Thank you for all your help. I sure have enough to go on.