Fiberglass replacement stock for custom CZ .500 Jeffery

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/2541062641

21 December 2010, 03:14

WLA

Fiberglass replacement stock for custom CZ .500 Jeffery

I have a custom .500 Jeffery built on a CZ action. It has a MPI stock on it that is too thick in the grip for my liking. I am looking for a replacment stock with a thinner grip, any suggestions ?

WLA

21 December 2010, 23:31

Dave Bush

Send it to Wayne Jacobson at American Hunting Rifles. He will make you a super stock.

Dave
DRSS
Chapuis 9.3X74
Chapuis "Jungle" .375 FL
Krieghoff 500/.416 NE
Krieghoff 500 NE

"Git as close as y can laddie an then git ten yards closer"

"If the biggest, baddest animals on the planet are on the menu, and you'd rather pay a taxidermist than a mortician, consider the 500 NE as the last word in life insurance." Hornady Handbook of Cartridge Reloading (8th Edition).

23 December 2010, 16:28

DavidC

WLA,

McMillan makes a pretty trim stocks for the cz55o.

Scroll to the bottom of the link to have a look.

mcmillan stocks

FIXED the link....!

Best,
Dave

24 December 2010, 09:51

470 Mbogo

Try CZ USA they have a very nice stock that has an aluminum bedding block in it. It's a really well finished and you should be able to get it in the states a lot easier than I did here in Canada
Take good care
Dave

www.470mbogo.com

24 December 2010, 22:16

jeffeosso

Mpi is not my fav.

opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com

25 December 2010, 04:24

470 Mbogo

I've got my old MPI sitting around in a closet somewhere