THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Found my Cape buffalo load for the 375

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Found my Cape buffalo load for the 375 Login/Join
 
One of Us
posted
Finally got out to the range today to test out some woodleigh 350gr PP's and Barnes 350gr TSX's from a CZ 550 worked over by AHR. A beautiful day for shooting. All groups at 100yds off a rest with the scope set at 4x. Three shot groups with about 10 min in between for barrel cool down. 80* F with light wind.


Did a bit of shooting with the 470 Merkel, mostly trail boss loads and a few full house 4831/500gr woodleigh loads I've gotten to regulate nicely. Even got the wife to come and shoot her new S&W 67 with some light bullseye loads under 148gr wad cutters.
 
Posts: 1457 | Location: New England | Registered: 22 February 2010Reply With Quote
One of Us
posted Hide Post
Great shooting

My CZ 550 is shooting 350 tsx's well also. (64gr of RL15, 2320 fps)
The 300 TSX with 65 gr of RL15 show excellent promise also.
I shot some Northfork 300 SS's, they shoot great

I haven't tried H4350 yet, by the looks of the Woodleigh group I should try some

What kind of work did Wayne do to your CZ? , he just did a quick tune up to mine (Crossbolt's, trigger, etc)
 
Posts: 1023 | Location: Imperial, NE | Registered: 05 January 2013Reply With Quote
One of Us
posted Hide Post
So that was IMR 4350, couldn't source H4350 and got the load info from Woodleigh for the IMR offering. No chrono yet, but they're from a 23" barrel. Had Wayne do his upgrade 2, and bedded it into to CZ Kevlar stock.
 
Posts: 1457 | Location: New England | Registered: 22 February 2010Reply With Quote
One of Us
Picture of BNagel
posted Hide Post
Congrats! (Any one of those loads would work, even factory with the upgrade done.)


_______________________


 
Posts: 4899 | Location: Bryan, Texas | Registered: 12 January 2005Reply With Quote
One of Us
posted Hide Post
So finally got home and put the mic to the paper. 69.6gr of IMR 4350, once fired remington brass, 350gr woodleigh pp bullet resulted in a 0.560" group edge to edge. Now to just see if I can ever shoot a group like that with it again!
 
Posts: 1457 | Location: New England | Registered: 22 February 2010Reply With Quote
One of Us
Picture of chuck375
posted Hide Post
Nice group and great bullet.


Regards,

Chuck



"There's a saying in prize fighting, everyone's got a plan until they get hit"

Michael Douglas "The Ghost And The Darkness"
 
Posts: 4808 | Location: Colorado Springs | Registered: 01 January 2008Reply With Quote
One of Us
posted Hide Post
now, the second part of the equation: how big will the group be shooting the magazine empty as fast as you can work the bolt?
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
One of Us
posted Hide Post
Are you shure you want a group that small.
After the animal is hit with first bullet, the following bullets will go through the same hole and not produce any shock or additional dammage.
Just joking.
Great rifle and great load.


Bob Nisbet
DRSS & 348 Lever Winchester Lover
Temporarily Displaced Texan
If there's no food on your plate when dinner is done, you didn't get enough to eat.
 
Posts: 830 | Location: Texas and Alabama | Registered: 07 January 2009Reply With Quote
One of Us
posted Hide Post
I always recommend to guys whose biggest rifle is a 375 to load the 350gr for hunting Buff. A bit of extra bullet weight provides some extra assurance.
 
Posts: 20177 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
one of us
posted Hide Post
I love those 350 gr. Woodleighs both the PP and the RN..The PP's are tougher and penetrate better, the RN are perfect for the first shot broadside, in herd hunting, they expand the size of a dwarf golf ball and come to rest on the off side skin.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42321 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Idaho Sharpshooter:
now, the second part of the equation: how big will the group be shooting the magazine empty as fast as you can work the bolt?


That'll be next week's (hopefully) report.
 
Posts: 1457 | Location: New England | Registered: 22 February 2010Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Biebs:
I always recommend to guys whose biggest rifle is a 375 to load the 350gr for hunting Buff. A bit of extra bullet weight provides some extra assurance.


Booked two buff (a cow and a bull), so one for the 375 and one for the 470. I've read numerous times that the 350's really step up a 375 rifle.
 
Posts: 1457 | Location: New England | Registered: 22 February 2010Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Bob Nisbet:
Are you shure you want a group that small.
After the animal is hit with first bullet, the following bullets will go through the same hole and not produce any shock or additional dammage.
Just joking.
Great rifle and great load.


That's quite the thought provoking comment Big Grin
 
Posts: 1457 | Location: New England | Registered: 22 February 2010Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Found my Cape buffalo load for the 375

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia