THE ACCURATERELOADING.COM BIG BORE FORUMS


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Recoil question Login/Join
 
one of us
Picture of Jaco Human
posted
How does the recoil of a 416 Rigby compares to a 378 Weatherby Magnum?

Is there anybody who got experience in both the calibers


Life is how you spend the time between hunting trips.

Through Responsible Sustainable hunting we serve Conservation.
Outfitter permit no. Limpopo ZA/LP/73984
PH permit no. Limpopo ZA/LP/81197
Jaco Human
SA Hunting Experience

jacohu@mweb.co.za
www.sahuntexp.com
 
Posts: 1250 | Location: Centurion and Limpopo RSA | Registered: 02 October 2003Reply With Quote
one of us
posted Hide Post
I have owned 2 different 416's, one a custom Enfield and my current one a CZ550, and a 1970's vintage 378 MkV. The MkV was factory stock with no muzzle break.
To be honest, I find the recoil less comfortable on my hogback stocked CZ550 with factory loads than the MkV with factory loads. I actually found both my MkV's, one 460, one 378, very easy to shoot....just thought the stocks were butt ugly!
My CZ550 is being restocked now and when done I think it will be far more comfortable.
In all honesty, I never thought the recoil on the 378 was all that bad. I guess I am strange in that way, as most people say it is one of the hardest kickers out there.
 
Posts: 1676 | Location: Colorado, USA | Registered: 11 November 2002Reply With Quote
One of Us
Picture of El Deguello
posted Hide Post
quote:
Originally posted by Jaco Human:
How does the recoil of a 416 Rigby compares to a 378 Weatherby Magnum?

Is there anybody who got experience in both the calibers


If you fire a 300 grain bullet from a 10.5 pound .378 Weatherby at 2926 FPS MV using 112 grains of powder, it produces 59.6 foot-pounds of recoil energy.

If you fire a 400-grain bullet at 2300 FPS MV from a 10.5 pound .416 Rigby using 105 grains of powder, it produces 60.3 foot-pounds of energy.

Seems about the same. However, what you feel might be very different, as the recoil from the .378 will be a sudden sharp punch, while the .416 delivers more of a steady push over a longer period (dwell time). In addition, the stock shape must also make a difference in what you feel......

Personally, I'd prefer to be shooting the .416!


"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
 
Posts: 4386 | Location: New Woodstock, Madison County, Central NY | Registered: 04 January 2005Reply With Quote
one of us
Picture of Jaco Human
posted Hide Post
Thanks to you for the replies, you confirmed my thoughts. I have shot with a 378WM in the past and I am busy building a 416R, but never shot one before.


Life is how you spend the time between hunting trips.

Through Responsible Sustainable hunting we serve Conservation.
Outfitter permit no. Limpopo ZA/LP/73984
PH permit no. Limpopo ZA/LP/81197
Jaco Human
SA Hunting Experience

jacohu@mweb.co.za
www.sahuntexp.com
 
Posts: 1250 | Location: Centurion and Limpopo RSA | Registered: 02 October 2003Reply With Quote
One of Us
posted Hide Post
I find my CZ rigby to kick more than my 378 did. This is with 300s at 3000 fps in the 378 and 350 TSXs at 2800 in the Rigby. With 400s at 2400 the Rigby kicks quite a bit more than the 416 Rem at the same speed. I guess the 20 extra grs of powder have something to do with it.
 
Posts: 558 | Location: Southwest B.C. | Registered: 16 November 2005Reply With Quote
one of us
posted Hide Post
Load the Rigby to 2600-2700 fps with a 400 and you'll sure be able to tell a difference. I have done it just for fun, but it must hit my recoil threshold as 2500 fps loads seem about half as hard kicking, my normal loads go 2530fps.


A shot not taken is always a miss
 
Posts: 2788 | Location: gallatin, mo usa | Registered: 10 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia