THE ACCURATERELOADING.COM BIG BORE FORUMS


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Reduced load 375 H+H Login/Join
 
One of Us
Picture of MarkH
posted
Hi Peeps

Just downloaded the 375 H+H with 40gn RL7 220gn Hornady FP. The MV is 1971 fps and energy 1998 fpe. Zero @ 25m and 100 beyond that she drops like a brick.
Consider it a massive 243 Big Grin The lower shot is the initial sighter which I always take at 25m. the next two ie zero are @ 25 and 100m. Very accurate round so no need to shoot groups for this excercise. To go to full power load just add 8 clicks up - what could be simpler




Mark


Hunting is getting as close as you can, shooting is getting as far away as possible.
 
Posts: 537 | Location: Worcestershire, England | Registered: 22 March 2005Reply With Quote
One of Us
posted Hide Post
Nice.

Smiler


analog_peninsula
-----------------------

It takes character to withstand the rigors of indolence.
 
Posts: 1580 | Location: Dallas, Tx | Registered: 02 June 2006Reply With Quote
one of us
Picture of buckeyeshooter
posted Hide Post
Looks great, thanks for sharing!!
 
Posts: 5728 | Location: Ohio | Registered: 02 April 2003Reply With Quote
one of us
posted Hide Post
OFS!

FWIW, Hornady and Speer have several downloaded recipes using their 220 and 235 grain bullets, respectively. This load is classic.

Many thanks.


 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
One of Us
posted Hide Post
Mark, I think you have done this exactly right.

Not to mention that you have a terrific load for whitetail, and very little felt recoil if you rifle is of sufficient weight.
 
Posts: 490 | Location: middle tennessee | Registered: 11 November 2009Reply With Quote
One of Us
Picture of MarkH
posted Hide Post
Cheer Guys.
Here in the UK the response was just - 'why'. Its a pity they are not as open minded about calibre versatility as yourselves.

Mark


Hunting is getting as close as you can, shooting is getting as far away as possible.
 
Posts: 537 | Location: Worcestershire, England | Registered: 22 March 2005Reply With Quote
One of Us
Picture of cmfic1
posted Hide Post
quote:
just add 8 clicks up - what could be simpler

Not much!

Looks like a winner, I may even try it out. I've never considered reduced loads in my H+H before.


Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel
 
Posts: 977 | Location: Alberta, Canada. | Registered: 10 May 2005Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
Bobc of this forum has used 5744 in his 375 H&H

quote:
I've had shockingly good results with 46 grains of 5744. 220 FP Hornday, 270 SP Hornday, and 300 FMJ Hornday all shoot in the same group with this load. Bob


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
One of Us
posted Hide Post
I use 5744 in my 375H&H and 416 Rigby. 50gr under a 300gr. Hrn RN gets you about 2200 in the H&H. 55gr under a Speer 350gr. gets you about 2000 in the Rigby. That's a M70 w/ 24" tube and a RSM w/ 23" tube, respectively. Those are the max. charges recommended by Accurate BTW. The H&H recoils like a 270 and the 416 like a lightish '06. Very accurate as well.

David
 
Posts: 539 | Location: NE Alabama | Registered: 11 February 2007Reply With Quote
One of Us
posted Hide Post
I just notice that target is CM, not inches. Impressive, yes, like a big 243.

So it is true; all one needs is a 375H&H
 
Posts: 1226 | Location: New England  | Registered: 19 February 2009Reply With Quote
One of Us
posted Hide Post
I use my 375 H&H on East Texas deer and find it very enjoyable. The deer don't seem to recognize that they have been hit by a sub-2000 fps bullet.
I also down-scale loads for my .348 Winchester model 71. Enjoy that just as much.
All my E-TX hunting is where shots are under 100 yards.


Bob Nisbet
DRSS & 348 Lever Winchester Lover
Temporarily Displaced Texan
If there's no food on your plate when dinner is done, you didn't get enough to eat.
 
Posts: 830 | Location: Texas and Alabama | Registered: 07 January 2009Reply With Quote
<Mike McGuire>
posted
I have mostly used around 40 grains of what would be H4227.....one of the Australian Extreme powders which we call 2205 and with 220 grain Hornady. Does around 2100 f/s.

In a very accurate 375 I have shot a 20 shot group that just under 1 inch.
 
Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia