The Accurate Reloading Forums
505 Gibbs loads

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/2161065031

08 April 2010, 05:14
J D
505 Gibbs loads
My Ph barreled action should arrive next week.
I got all the parts and reloading stuff in house or on the way. I got woodleighs and Barnes tsx and banded solids on the way. I need a load for 2150 fps with the 500-535 gr bullet. I am hoping to have her shooting by the shoot and hoot.

JD


DRSS
9.3X74 tika 512
9.3X74 SXS
Merkel 140 in 470 Nitro
08 April 2010, 18:31
500 Fan
You can get load data from the original A2 loading manual, "Any shot you want" which is available on line from booktrail.com

I shoot a 505 Gibbs and absolutely love the cartridge and 99% of the negative "stuff" written about it done by people who have no experience with one and have never even shot one.

Ryan Breeding has some dragon breath loads that I think are above my pain level; at least for a regular diet.

Good Shooting!


The display of PURE POWER is nothing short of AWESOME !

1 JOHN 3:18
08 April 2010, 23:30
500N
You will find it very comfortable to shoot at 2150 fps - as long as your gun fits you etc - the usual things.

It is a great cartridge, you will love it.
09 April 2010, 00:30
jeffeosso
JD shoots my 500 JEffery just fine -- he can handle it.


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
09 April 2010, 05:44
J D
I talked To MRC yesterday, They went to chamber it but the reamer grew legs in the last week.
They had one overnighted and were going to try to get it out today, if not it will go out Monday. I am out of town 17th through the 19th

I will try my like hell to get her shooting by the shoot and hoot. I will bring it even if its not done for all to see and fondle. I had MPI inlet the stock for the granite mountain action its the 550 mag stock. I am hoping that the action will fit with out to much build up required for a full hight magazine. If the stock is close I get her done in time, each build of Devcon takes 12 hours to dry hard enough to work; that could slow things down big time.

I got dies and 100 case and bullets and a pound of rl 25 to get started. I got the new Barnes edition also for all to see, it has TSX loads listed.

JD


DRSS
9.3X74 tika 512
9.3X74 SXS
Merkel 140 in 470 Nitro
09 April 2010, 07:03
doclee
505 Gibbs 525 Barnes TSX Fed 215 Primer Jamison case RL22 130 grains 2160 54F

505 Gibbs 600 Woodleigh Solid Fed 215 Primer Jamison case RL22 125 grains 2060 54F

505 Gibbs 525 Barnes Banded Solid Fed 215 Primer Jamison case 132 grains RL22 2300 45F

505 Gibbs Practice Loads

Mt Baldy Custom 600 FNGC sized .507 Fed 215 Primer HBS case AA 5744 62.5 grains 1750 42F

JBL 600 RNGC sized .506 Fed 215 Primer HBS case AA 5744 62.5 grains 1740 42F


Do not use fillers with AA5744.

Newest Barnes manual has load data for the Gibbs
The Norma manual has limited data for the Woodleigh 525 Soft and Solid using Norma MRP powder

Any Shot you Want by Alpin has some data
09 April 2010, 07:08
J D
quote:
Originally posted by doclee:
505 Gibbs 525 Barnes TSX Fed 215 Primer Jamison case RL22 130 grains 2160 54F

505 Gibbs 600 Woodleigh Solid Fed 215 Primer Jamison case RL22 125 grains 2060 54F

505 Gibbs 525 Barnes Banded Solid Fed 215 Primer Jamison case 132 grains RL22 2300 45F

505 Gibbs Practice Loads

Mt Baldy Custom 600 FNGC sized .507 Fed 215 Primer HBS case AA 5744 62.5 grains 1750 42F

JBL 600 RNGC sized .506 Fed 215 Primer HBS case AA 5744 62.5 grains 1740 42F


Do not use fillers with AA5744.

Newest Barnes manual has load data for the Gibbs
The Norma manual has limited data for the Woodleigh 525 Soft and Solid using Norma MRP powder

Any Shot you Want by Alpin has some data



just what I was looking for thanks

JD


DRSS
9.3X74 tika 512
9.3X74 SXS
Merkel 140 in 470 Nitro
09 April 2010, 13:59
338User
I use 130gn AR2209 (equiv H4350) with the 600gn Woodleigh for 2270 fps. This is with Bertram cases, and FED215 primers. I have used 132gn AR2213SC (Equiv H4831SC) with the 525gn Woodleigh (same cases & primers) for 2300 fps. I expect you will get around 2150 if you use 128gn AR2213SC with the 525gn bullet. I don't like to go lower than 128gn of powder in that big case as I have had some error readings on my chronograph which (I think) were due to unburned powder at 126gn loads.
09 April 2010, 16:41
fourbore
Does this help (From AR site)

http://www.accuratereloading.com/reload.html

and the 505

http://www.accuratereloading.com/505gibbs.html