THE ACCURATERELOADING.COM BIG BORE FORUMS


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
.416 Ruger scope... Login/Join
 
one of us
posted
In using my .416 Ruger in RSA this year, it became clear that for plainsgame that a 1-4x scope was not quite sufficient. At the range I was shooting moa with it, but in the bush the lack of magnification at ranges over 70yds was apparent. My question is that with this being a magnum action, what scopes will fit it? I think on most Leopolds the tube is just not long enough before it starts tapering into the objective.

Thanks
Gene
 
Posts: 543 | Location: Belmont, MI | Registered: 19 December 2002Reply With Quote
one of us
posted Hide Post
The 1.75x6E scope might work. When they first brought out this model, it was very short, and didn't work on hardly any bolt actions. They have lengthened the maintube now. However, that Rigby action is so long, you might have a problem sliding it back far enough without hitting the bell with the front ring. The 1.5x5 2 would work, but that is only 1x more than you have now. If you go to their website, you can find specs of all the scopes. Ruger does make an offset scope ring, but that would be a last choice.
 
Posts: 2852 | Location: Michigan | Registered: 02 September 2001Reply With Quote
one of us
posted Hide Post
I don't understand your thinking, a 4X scope is good enough for 500 yard shots...all you have to do is put the cross hair on the shoulder...at 10 yards to 100 yards you don't need any scope over 2X, you lose to much field of view....I have shot big game at beyond 300 and 400 with a 2.5X scope many times.
 
Posts: 42321 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia