This guy has put it all together. Just gotta build it up. I just noticed the .416 barrel is ordered but hasn't arrived yet.

http://www.auctionarms.com/search/displayitem.cfm?ItemNum=4562158

[ 06-30-2003, 16:17: Message edited by: Roger Rothschild ]

I dont know Roger... I dont buy any guns over the internet UNLESS I can inspect them in person, and that includes actions, and certainly wood. The forearm of what the stock blank shows... looks alittle scary as I believe that was a living knot/sprout in the tree (based on the depth and width if you look closly on the thickness you can see a shaded diametric)
BTW Roger... what were you going to use that scrap steel for? A good source is MSC, get their "Big Book".

[ 06-30-2003, 12:56: Message edited by: smallfry ]

the only things in that pic you get are the action and peepsite.

the stock is "representative" and the barrel shown is only about 14" long.

I bid 150 on it... for a remington action, sure...

jeffe

It sounds like you get everything there and the barrel which is comeing.

"Everthing to build a .416 Enfield Magnum Rifle! A perfect, unaltered P14 Enfield action, marked "RE" SN#54940. A nicely figured piece of American walnut with correct grain flow for a magnum rifle, a (represented as a piece of round stock in the picture,.... ordered, not yet received), a Douglas #4 contour .416 barrel blank, 1-12 twist, unchambered, unthreaded, 1.250" breech, 0.650" muzzle, 27.5" OAL, and a vintage Pacific EN-1 receiver sight. Go ahead,.........build that .416 Taylor! Buyer pays $25 ship to your FFL or C&R license."