THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    SB Zenith 1.5-6x42 on cz 550 .416 will it fit ?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
SB Zenith 1.5-6x42 on cz 550 .416 will it fit ? Login/Join
 
PC
One of Us
posted
Folks considering the above mentioned scope on a cz 550 safari mag .416 but the tube on this model looks lite on for mounting real estate due to the action length of the cz 550 magnum. Rings used would be Warne qd's anyone know with 100% certainty that this scope would fit on a cz550 magnum ?

Thanks.
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
Colin Masters
One of Us
posted Hide Post
You will almost certainly need an extended front ring. I had the same problem with my Mauser due to the sculpted rings and qd rings I wanted to use. I got a longer scope because I really like the rings and bases.
 
Posts: 1280 | Location: The Bluegrass State | Registered: 21 October 2014Reply With Quote
JR
one of us
posted Hide Post
Watch the eye relief too. S&B' s sometimes aren't too generous in that department. Had a few that wouldn't work on hard kickers. No finer scope though imho.


I'm what you call your basic famous.
 
Posts: 1259 | Location: Colusa CA U.S.A. | Registered: 27 June 2001Reply With Quote
PC
One of Us
posted Hide Post
quote:
Originally posted by Colin Masters:
You will almost certainly need an extended front ring. I had the same problem with my Mauser due to the sculpted rings and qd rings I wanted to use. I got a longer scope because I really like the rings and bases.


Yes the new 1-8 exos looks good but eye relief is 3.52" only....

Thanks folks.
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
416Tanzan
One of Us
Picture of 416Tanzan
posted Hide Post
On CZ550 416 Rigbys,
the Nikon Monarch 2-8 fits, just barely. It has a 4" eye-relief throughout and works well in 416 even at full capacity handloads (6200ft# muzzle energy).

the Nikon Inline 3-9 has a better eye-relief, 5" throughout, but it requires the CZ mount, since its mounting length is only 4.73". Both scopes may be among the most rugged available, distinctly more than Leupold's reputation.



Hope the picture works after Photobucket extortion threats.


+-+-+-+-+-+-+

"A well-rounded hunting battery might include:
500 AccRel Nyati, 416 Rigby or 416 Ruger, 375Ruger or 338WM, 308 or 270, 243, 223" --
Conserving creation, hunting the harvest.
 
Posts: 4253 | Registered: 10 June 2009Reply With Quote
PC
One of Us
posted Hide Post
quote:
Originally posted by 416Tanzan:
On CZ550 416 Rigbys,
the Nikon Monarch 2-8 fits, just barely. It has a 4" eye-relief throughout and works well in 416 even at full capacity handloads (6200ft# muzzle energy).

the Nikon Inline 3-9 has a better eye-relief, 5" throughout, but it requires the CZ mount, since its mounting length is only 4.73". Both scopes may be among the most rugged available, distinctly more than Leupold's reputation.



Hope the picture works after Photobucket extortion threats.


Photo didn't work, thanks for the ideas....I do have a 2.5-10x32 compact nxs I could mount on it, I know these scopes work on .416's and it's good glass and tough.......just doesn't look right on a wood blued gun as they have a tactical style to them.

Should I not worry about the "Look" and just use this compact nxs if I purchased a SB I'd maybe sell this scope to help pay for it.
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    SB Zenith 1.5-6x42 on cz 550 .416 will it fit ?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia