The Accurate Reloading Forums
T/C Encore Slug Barrel

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4511043/m/80210296

12 February 2003, 13:21
hunt4ever
T/C Encore Slug Barrel
What slug shoots best in this? (26" fully rifled)
I have heard good things about Winchesters new
high vel.1900fps slug, Any help?
19 February 2003, 14:41
Trapshooter
You should go with the Remington Cort-Lokt Sabots Or the Remington Buckhammers that are new for 2003 they supposively shoot 3" groups at 100 yds
21 February 2003, 07:51
small fish
3" groups at 100 yds. are NOT acceptable in a good slug gun,especially the Encore. [Razz]

[ 02-20-2003, 22:52: Message edited by: small fish ]
21 February 2003, 09:02
Yardbird
Only unacceptable if you're deer is smaller than 3",right? [Smile] j/k, I'm with you small fish, it should be 1" or 1 1/2"
Yardbird
21 February 2003, 09:51
Trapshooter
All ivr used is the old foster style slugs in the smoothbore so it, was ok groups to me. The 1 1/2 inch groups were with sabots, Right.
22 February 2003, 12:25
small fish
1" to 1.5" groups should be the norm in a good slug bbl.I don't have an Encore slug bbl.(yet)so I couldn't tell about that.My 870 with Hastings bbl.(12 yrs old)shoots that well along with my Benelli M1-90 that does better than that. [Wink]
26 February 2003, 12:50
hunt4ever
I was thinking more like 3" groups @ say 200 yrds
my 1187 will shoot 1" @ 100 with rem. copper sabots .I hope my encore shoots well at 200 .
If it ever warms up a little here in WV. I'll
find out.
27 February 2003, 11:45
small fish
TrapShooter Yes they are sabots with a fully rifled bbl.3" groups at 200 yds would suit me just fine and dandy. [Smile]