The Accurate Reloading Forums
Beretta A391 replacement stock...help

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4511043/m/564106877

14 December 2007, 22:57
Jon
Beretta A391 replacement stock...help
I have a new Beretta A391 Urika II with the "extra-grain" stock. The shape/fit, etc. is fine but (to me) the fake grain and finish is UGLY!. All I want a plain, oil finished, walnut replacement. Any ideas? Thank you...

Jon
17 December 2007, 08:19
DuaneinND
You might get lucky and find someone to trade or be able to purchase an extra set from someone. Talk to the dealer you purchased the gun from, maybe they can arrange a trade.


www.duaneguns.com
17 December 2007, 21:12
Dutch
Start with talking to Wenig or Cole guns. You may be able to buy a "take off" from Cole. HTH, Dutch.


Life's too short to hunt with an ugly dog.
21 December 2007, 04:31
Kyler Hamann
I just contacted Cole with a similar question (about the 390) and it didn't sound like they had any "take-off's" but had bottom-of-the-line stocks for $185 (unless that's what they were getting for their take-offs, it wasn't clear).

Hope that helps,
Kyler


___________________________
www.boaring.com
_____
21 December 2007, 08:06
Jon
Thanks to all for the comments and leads. I ordered a stock from Cole's on Tues. It was not cheap but, based upon the pictures, it's just what I'm looking for. Should receive in a few days if it survives UPS. Thanks again for the help.

Jon