The Accurate Reloading Forums
Beretta BL-3 O/U

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4511043/m/19710096

28 August 2002, 05:08
Stonecreek
Beretta BL-3 O/U
I just acquired a like-new Beretta BL-3 over/under in 28 gauge from an estate. I'm ecstatic over my find, but want to ask of your collective knowledge about some apparent discrepancies in the "Blue Book".

The BL-3 is listed only in 12 and 20 gauge, not 28. The BL-3 is also listed as having ejectors, while my gun has extractors. My gun has a very low serial number, "N002XX" -- does anyone have a reference to tell me the year of manufacture? Thanks!
28 August 2002, 14:45
<zasgar>
As I allready described in an other post in the shotgun section, the manufacturing date is in the proofmark. Just give me the 2 letters in the square or the set of roman numerals and I will try to figure out the year. The Italians have been using the date codes since 1948.
On my Beretta the datemark is under the chambers.

MK
28 August 2002, 14:46
<zasgar>
Looks like I was stuck on full auto...

[ 08-28-2002, 05:50: Message edited by: zasgar ]
28 August 2002, 14:45
<zasgar>
snip

[ 08-28-2002, 05:53: Message edited by: zasgar ]
28 August 2002, 14:47
<zasgar>
snip

[ 08-28-2002, 05:55: Message edited by: zasgar ]
28 August 2002, 14:47
<zasgar>
snip

[ 08-28-2002, 06:03: Message edited by: zasgar ]
29 August 2002, 03:30
Stonecreek
Zasgar: I just saw your post on proofmarks. I also found a Beretta proofmark key in the reference section of the "Blue Book". Thanks, I'll look it up when I have time.
30 August 2002, 06:34
Stonecreek
Zasgar: Mine has Roman Numerals XXVI, which indicates 1970 according to my source. Is this correct? This would be consistent with the dates of manufacture listed in the "Blue Book".
31 August 2002, 13:09
<zasgar>
Yes, XXVI should be 1970. Is the Gun nice ?? post some pictures.

MK
04 September 2002, 05:28
Stonecreek
Yes, very nice. Decent, but not overly fancy grain in the buttstock, gracefully slender forearm, and a modicum of engraving on the receiver. Overall, it is somewhat lighter and slenderer than my Win 101 28 gauge (which has 28" barrels). The rib is also narrower than the 101. I like the ability to move the barrel selector in either on-safe or off-safe position, a capability my other O/U's only have in on-safe. It was a bit confusing to move the selector to the left for firing the under barrel first, in that all of my other O/U's are the opposite.

I used it this weekend to bring home a daily limit of doves (15) on both Sunday and Monday. I don't think I shot it quite as well as I have the 101, but for a gun with which I was totally unaccustomed, I was very pleased with its performance (and mine, I suppose). It is choked IC/MOD but seems to throw a rather tight pattern from either barrel. I used a standard 3/4 oz skeet load of #9's, some factory and some reloaded to the same specs. These are fully adequate for our mourning doves, and even whitewings for that matter.

[ 09-03-2002, 20:31: Message edited by: Stonecreek ]