The Accurate Reloading Forums
Not nice to gloat, but...

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3821043/m/545103578

09 June 2008, 00:18
Doubless
Not nice to gloat, but...
I just had to brag a little bit: went to a show earlier today and found a White Lightning. $250 out the door, and it looks like maybe 10 rounds through it. The stock has a dent, but that is cosmetic only. No wear at all on the breechplug, and the steel is very clean. Still has the sights, and the ramrod is undamaged. I pick up the original box and accessories late this week.

Less than 2000 made total, and never any returned because of inaccuracy. I got lucky!
09 June 2008, 04:37
nordrseta
Them as say gloating isn't nice are usually the ones with nothing to gloat about. Enjoy.
11 June 2008, 09:17
Underclocked
Nice find. Smiler

I should add that you might want to reinforce the stock at the pistol grip with a bolt or hardwood dowel. I believe Doc even recommends that procedure. I know of one that snapped without it.

Courtesy of Batchief although he doesn't know it Big Grin :

The pics show where to drill, and the angle. Use a 5/16th "long" bit and the same sized walnut dowel, cut to around 4.5 inches. Mark your drill bit with tape so you know when you're there. The hardest part is drilling it straight,,so you'll either have to place the stock in a vice, or have somebody hold it firmly while you drill. TAKE YOUR TIME!

Before you insert the dowel,,take a utility knife and cut some slits in the dowel lenghtwise. (This allows the glue to seep into the groves and adhere to the stock) Not much to it really. Unless you drill off center and come out the side of the grip area...

"




WHUT?
14 June 2008, 22:12
Doubless
Thanks, Richard.

I gotta stop buying these things... I now have six Whites, and still don't have an official place to hunt!
15 June 2008, 05:02
Buglemintoday
Doubless - Sounds like you really lucked out!

I love the Whites


"Let me start off with two words: Made in America"