Melting in the core will anneal the jacket. I make my solids on a CNC. I haven't made a lead core on the CNC yet. I have noticed that speer machines their high dollar bullet...But...They do draw it once.

Thanks fo the info...
"you trying to make a jacket..."
Yes, I figured a solid rod could be hollowed out/drilled deep enough to add lead rod to make a bullet.
It must be correct that without a swage step in the process the bullet's nose would be flat. I'm interested in a round-nosed bullets.

Q... which is more differcult to make bullets with, lathe-turned jacketed bullets, or swaged tube jacketed bullets? Which method might be more time consuming?
Assuming nearly identical RN bullets, of the same calibur and weight, which process would produce a cheaper bullet?Thank you all, you've all been a great help.
Lately I've gotten quite intrigued with bullet making. Very interesting. ~~~Suluuq

Rusty, Does John Walker shoot with you on occasion? He once many many years ago was an interested shooter.

M. POTS
If your using a manuel press like a Wall Nut hill's
you have to start by cuting a lenght of lead
and running it through a core die to get it to come out to the right weight. next your going to need bond the two together jacket to lead core .once finished melting the two together your going to have to core seat the lead tighter
into the jacket. once done you will be running it into the point forming die and finishing the bullet.

When doing a run of bullet's it goes much faster

---

It's not realy nessary to melt the core to the jacket unless you want a bonded bullet. Swaging in the core is more than enough to make a accurate benchrest bullet! I think.. But my opinion and a dollar will get you acup of coffee at the truck stop.

sr25

Your right .. If your making up flat based bullet's
and you are not worryed about the jacket coming off when it hit's then yes .

If your making up bullet's and you want the jacket's
or jacket to hang with the lead core then bonding it is the route to go.

To often core's will come free from there jacket's unless
thay are bonded or another way is to cut thread's inside the jacket and use a smaller top punch and press the lead into the core that way the heaver the thread the tighter the lead core will hang on..although melting and bonding the core to a threaded jacket work's best if your really worried about jacket seperation.

and as far as benchresting a bullet thats not been melted into the jacketand bonded ....you can ..it's just that i don't..


Pottsy

I'm sure Johnny shoots, but he doesn't shoot with me. I wouldn't mind shooting with him at all. If memory serves, he's a hunting guide up here, so it stands to reason he'd teach me a thing or two. I grew up knowing his younger brothers Nelson and Randy (Nelson was a classmate), but I never actually knew Johnny like a friend. I just know about him some. ~~~Suluuq