The Accurate Reloading Forums
Re: Babit instead of heaver jacket walls

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3621043/m/655106841

23 August 2004, 17:05
arkypete
Re: Babit instead of heaver jacket walls
Martin
The Winchester 95 is one of the new issue.
Here's the photo, finally

Jim
24 August 2004, 07:26
MartinPotts
Thank's for posting the picture's
like really like the look of the 405
I went 404 Jeffery though i found it work's alittle better on chipmunk's and stray cat's

I have yet to get my swage set for the 404 i took the .423 Diam rather than go the other size's like .419 and up

I thought since the newer jeffery's 404 were in .423 that that would be a good starting point...

Hay that 375 is kinda nice what are you running in the way of FPS with mid size bullet's in it .
24 August 2004, 16:31
arkypete
Martin
I don't have a chronograph so I have no idea as to velocity.
I use the loading data for the 35 Whelen for loading my 375 Whelen, with the same bullet weight.
Jim
24 August 2004, 16:38
arkypete
Quote:

I have yet to get my swage set for the 404 i took the .423 Diam rather than go the other size's like .419 and up

I thought since the newer jeffery's 404 were in .423 that that would be a good starting point...




A question...
Are you putting jackets on these 404s?
Where you getting jackets?
Jim
24 August 2004, 19:37
MartinPotts
Contact -- Hairfield, Harrell D (GE Energy)

harrell.hairfield@ps.ge.com

Right now Butch has just this-- .423 i have in a .030 wall

Jim > butch is back up and running again

You have? bought from him before . right
All the jacket's are soft copper not hard like the once's the aussie's make....
There VERY good jacket's in about any lenght you want them