Hi i forgot to add somthing guy's

A bullet made from powdered tungsten will.! fall apart

on impacting any hard item... shoulder bone hard wood



It will fall back to powder



Powdered tungsten to be used in that form to make a bullet must first be formed to the shape of the bullet

Next it is removed and placed in to an oven or furnice

and heated then cooled down then place back in to the point former and swaged again then removed and placed inside a form mould of the same shape as the point former

and heated to 2800 Deg/



The use of powder tungsten as bullet's was ment for indoor

ranges requiring the bullet to destroy it self on impact





Pottsy

I was looking at the qualities of "W" again and the rod available at www.mcmaster.com is a thought.

Make the bullet jacket on the lathe, either bronze, brass or copper, drill the appropriate size hole, drop in the core, (machined to size) and finish it off with a dab of molten lead. face it in the lathe and you've got a fine very heavy bullet.

Disclaimer: I have NO earthly idea if this would work, but it sounds reasonable to me.