THE ACCURATERELOADING.COM MISCELLANEOUS FORUM


Moderators: Canuck
Go
New
Find
Notify
Tools
Reply
  
Grizzly products Login/Join 
Beretta682E
One of Us
posted
Thinking of getting this


https://www.grizzly.com/produc...EAQYASABEgLxRPD_BwE#

Anyone use grizzly products ?

Thanks for any info

Mike
 
Posts: 13145 | Location: Cocoa Beach, Florida | Registered: 22 July 2010Reply With Quote
JTEX
One of Us
posted Hide Post
I have one of their lathes and have purchased quite a bit of tooling from them.....you have to pay attention some of their stuff is a good value some is ....well...cheap.
 
Posts: 42463 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
NormanConquest
One of Us
Picture of NormanConquest
posted Hide Post
I wholeheartedly agree that when buying ANY tooling go for the best quality regardless of price. One will find in the long run than a (cheap) bargain is not so. I've bought top of the line machinery for years + they are all still working. I even have a seaming machine that was built in 1869 + still works as good as the day it was made.


Never mistake motion for action.
 
Posts: 17357 | Location: Austin, Texas | Registered: 11 March 2013Reply With Quote
Beretta682E
One of Us
posted Hide Post
This seems like the best $400-$800 ultrasonic that one can drop an ar upper into.

I assume it is made in China - I don’t have any problem with Chinese made stuff as long as it works.

I don’t do warranty replacements - too much paper work. I wish Costco sold one but they don’t.

I will look around on amazon too.

Thanks for the info.

Mike
 
Posts: 13145 | Location: Cocoa Beach, Florida | Registered: 22 July 2010Reply With Quote
butchlambert
One of Us
posted Hide Post
Shiraz is a very good person to do business with and he has true customer service.
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
Beretta682E
One of Us
posted Hide Post
I bought it. $375 with free shipping.

Their IT was terrible on their website but their phone center was good.

Let’s see how it works.

My guns will be clean for once Big Grin

Mike
 
Posts: 13145 | Location: Cocoa Beach, Florida | Registered: 22 July 2010Reply With Quote
Dulltool17
One of Us
Picture of Dulltool17
posted Hide Post
I don't think you'll be disappointed, Mike.

Like Jim, I own a Grizz Lathe (combo machine with a milling head) and a bunch of tooling from Grizzly. I'm quite pleased with my purchases.

Shiraz, the owner, has been expanding into the shooter's equipment/gunsmithing area over the past several years. I would expect he'd be looking to offer the kind equipment he would use, as he's a shooter.


Doug Wilhelmi
NRA Life Member

 
Posts: 7503 | Location: Texas Hill Country | Registered: 15 October 2013Reply With Quote
butchlambert
One of Us
posted Hide Post
quote:
Originally posted by Dulltool17:
I don't think you'll be disappointed, Mike.

Like Jim, I own a Grizz Lathe (combo machine with a milling head) and a bunch of tooling from Grizzly. I'm quite pleased with my purchases.

Shiraz, the owner, has been expanding into the shooter's equipment/gunsmithing area over the past several years. I would expect he'd be looking to offer the kind equipment he would use, as he's a shooter.


Shiraz has closed Bullets.com. He closed out most of his shooting supplies, but some are listed on his Grizzly site.
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia