Stock for Model 70

06 May 2003, 17:45

Nebraska

Stock for Model 70

I have a Win Model 70 Classic in 300 WM and want to drop it in a new stock. My goal is to increase accuracy and decrease weight with a design that is good at managing recoil. Any suggestions?

06 May 2003, 20:07

Andre Mertens

I've an Hoghe overmolded w/ full bedding block on order for my .338. I handled one and found it very comfortable to handle under all weather conditions. Also it carries some sort of vacuum recoil pad that should cushion recoil effectively.

07 May 2003, 08:39

DB Bill

I think one of the nicest stocks available for the Model 70 is made by Borden...they used to be called RimRock and were designed by Jim Cloward.

07 May 2003, 18:43

Nebraska

DB Bill,

I checked out their site. Those camo/animal patterns are toooo kewl!! [Big Grin]

If they promote accuracy like a McMillan and the designs tame recoil well, I'll have to try one.

07 May 2003, 19:02

tom holland

quote:
Originally posted by Nebraska:
I have a Win Model 70 Classic in 300 WM and want to drop it in a new stock. My goal is to increase accuracy and decrease weight with a design that is good at managing recoil. Any suggestions?

I just got a McMillian for my 300wsm and sure looks good. Had to wait about 2 months for the stock but well worth it. Tom

08 May 2003, 03:11

Nebraska

Which model did you choose? Any idea on the weight?

[ 05-07-2003, 18:12: Message edited by: Nebraska ]

08 May 2003, 09:21

DB Bill

You can "adjust" the weight of a McMillan stock by telling them how you want it filled......ready to go with recoil pad etc most of them run pretty close to 30 ounces in sporter-type stocks....they can make them heavier if you want.

08 May 2003, 09:36

mark65x55

I'd like to cast another vote for the Rimrock. Mine weighs 28oz with studs and recoil pad.

08 May 2003, 11:27

MtnHtr

Neb,
My favorite Win 70 stock is the McMillan Supergrade. DB is right on with the weight specs, this stock weighed in at 32oz with "Weatherby -fill" in the action area,with pad and studs. I left the remaining "fill" choice up to McMillan. This stock really handles the recoil well, pay attention to the size of the butt. You want a stock that will require at least a medium size pad. Speaking of pads, you can't go wrong with a 1" Pachmyr Decellerator, they come in several styles.

The Rimrocks are nice too, at least the ones I have seen. I prefer the Mcmillans only because I am a "swirl" color fan. MtnHtr

[ 05-08-2003, 02:29: Message edited by: MtnHtr ]

08 May 2003, 11:42

mr308win

I went with a H S precision. They built a lefty for me, took a little longer to recieve. I had it painted like the Sharpshooter, winchester custom shop had a couple of years ago.

08 May 2003, 18:00

Nebraska

MtnHtr,

I like that swirl too. I've yet to see a better lookin' rig than the "Coyote Bomber"!!! [Big Grin]

What's 'Weatherby-fill'?

09 May 2003, 05:56

MtnHtr

Neb,
Correction, I should have termed it "Weatherby glass" which refers to the "fill" Mcmillan puts in its stocks. "Weatherby glass" is McMillan's 2nd densest fill, 40% resin & 60% fibers. Its plenty strong for the big boomers. The densest fill is "solid glass" which is 60% resin & 40% fibers, I've seen this heavy fill in alot of bench stocks. You're best bet when ordering a McMillan stock is to specify what stock weight you prefer and what cartridge the rifle will be chambered for. McMillan will then build it to suit your requirements. Do keep in mind that fiberglass is 10 times as strong as wood so a light spec'd McMillan will be plenty tough as long as you give them the weight and chambering desired. I've never order'd a lite spec'd McMillan so I cannot relay how lite McMillan can build one. MtnHtr