The Accurate Reloading Forums
Timney Triggers...
17 June 2002, 12:42
<David Boren>Timney Triggers...
Anyone with experience please tell me what you think of these triggers. I am SERIOUSLY considering a Timney for a replacement trigger to replace that god-aweful factory remington ADL trigger. I used a scale-thingy to measure the trigger pull of my factory trigger, and it was almost 8 pounds!!! I was sad. I dont want that. I want a 2.5 lb trigger pull. And, well, I was just wanting to know how the Timney worked before I spent 83 bucks (75 for the trigger and about 8 for S&H). Any reponses will be appreciated.
17 June 2002, 12:48
parshalquote:
Originally posted by David Boren:
Anyone with experience please tell me what you think of these triggers. I am SERIOUSLY considering a Timney for a replacement trigger to replace that god-aweful factory remington ADL trigger. I used a scale-thingy to measure the trigger pull of my factory trigger, and it was almost 8 pounds!!! I was sad. I dont want that. I want a 2.5 lb trigger pull. And, well, I was just wanting to know how the Timney worked before I spent 83 bucks (75 for the trigger and about 8 for S&H). Any reponses will be appreciated.
You can easily adjust a remington trigger down from 8 lbs. Some will go to 2.5 lbs. but you should be able to get to 3 lbs. with no problems. Here's two links:
http://www.varminthunters.com/tech/crisp.html
http://www.snipercountry.com/RemingtonTriggers.htm
Just be sure you thoroughly test it when you're done adjusting it.
I used the above instructions and it worked quite well. However, after shooting it for a while I decided I wanted a lighter trigger and removed a screw completely before cross threading it. I bought a Jewell trigger and have never regretted it. Very expensive but you'll never look back.
Sorry, I've never tried a Timney so I can't say anything good or bad about it.
17 June 2002, 13:11
ACRecurveDavid,
Welcome to the forum! I had a Rem 700 with a 9 lb pull many years ago...had it adjusted to 2.5# by the local gunsmith and it worked beautifully as long as I didn't wear a glove on my right hand! I have a Mauser 98 416 Taylor with a Timney adjusted to 2.5 lbs and I honestly can't tell any difference between that and the Rem. trigger---but it has been aver 20 years ago that I had the Rem...not too good a comparison! You will likely be happy with either although the adjustment to the factory trigger will be less $.
Good Hunting!
17 June 2002, 13:11
<David>I asked my gunsmith the same question a few years ago and he told me that unless you buy a Jewel trigger for your Rem, you can't beat a properly adjusted Rem factory trigger. After he adjusted mine for me (on 3 M700s), I have to agree. He was able to get down to 2 lbs on my varmint rigs and he adjusted my other hunting rifles to 3 lbs. Very crisp, no excessive take-up or over-travel on any of them. In order to get it down to 2 lbs, he replaces the return spring.
17 June 2002, 17:46
downwindtracker2Read Rifle Basic problems in gunsmithing,I am still annoyed.
[ 06-17-2002, 08:47: Message edited by: downwindtracker2 ]18 June 2002, 04:24
Cold BoreTimney makes a fine trigger for a hunting rifle. I use a few of them myself, with no complaints.
Try the above links, and see what you can do with your factory trigger. I agree, they can be made to be excellent triggers. If it doesn't work, you haven't lost anything except a little time.
You can always get the Timney if you're still unhappy after working on your factory trigger.
18 June 2002, 04:59
Matt in Virginia[QUOTE]Originally posted by David:
[QB]I asked my gunsmith the same question a few years ago and he told me that unless you buy a Jewel trigger for your Rem, you can't beat a properly adjusted Rem factory trigger.
True. Adjust it, have it adjusted, or buy a Jewell. Could'nt agree more with your smith.
Regards, Matt.
18 June 2002, 08:58
<Eric Leonard>I have a Timney,a Shilen and 3 with the factory Rem. trigger.Unless I pick up my varmint rifle with the Jewel I honestly cant tell the difference.
I bought the Timney first then the Shilen trying to beat the Rem.The shilen is a little easier to adjust than the factory but after you get them set I bet there aint over 4 ounces difference in them.
The Jewel will break anywhere you want it up to about 3 1/2 lbs.
18 June 2002, 14:59
<Paul Dustin>I have a Timney trigger on my 22-250 it is set at 2 oz. I think Timney are one of best you can buy
18 June 2002, 17:42
hotweatherhunterI have 3 remington 700s, 2 with very well adjusted factory triggers and 1 with a timney trigger
which I had installed after suffering some damage to the factory trigger. I must admit that
I prefer the properly adjusted factory trigger to the timney. My suggestion is to find a good
gunsmith or learn to correctly adjust the remington trigger and pocket the change
22 June 2002, 12:59
AtkinsonI think Canjar and Blackburn make the best triggers in the world, no I don't think that, I know that.....Jewell has a good rep with the target shooters and benchresters...Timneys are a good hunting trigger on big game rifles I suppose but they look pretty crude to me and don't fit back in the trigger guard like a Blackburn....
I do not trust Rem. triggers or saftys, just to much smoke and fire on that one and I know they have settled out of court for millions and millions and are under constant litagation for accidental discharges with safties engaged.