There is on "slight" difference between a nesika and a sako in price. My pick of the two should be the nesika. I suggest that you take a look at McBros and Ed Brown. What it all depends on is how much $$$$ you have to spend. I owuld have picked McBros, Ed Brown and Nesika rather than a sako 75, but this is just me. Good LUCK
I got a reply from the Brown's today. Two weeks left untill my action arrives. DB Bill you seem to have a good taste regarding rifles. What is the cambering ??
I eny you because of the MCRT rifles. I will get one soon.
JOHAN
[This message has been edited by JOHAN (edited 02-09-2002).]
However, I would not use the HS Precision Magazine again. It works fine but this is the only rifle I own with a removable magazine and I prefer the Rem BDL type.
Good Hunting
Jeff in ND
I looked at several of the other custom actions and they may be great, but personally, many of them just seemed like Remington 700s, modified enough to call it a custom action, and some cost quite a bit more than the Nesika. My take was why not use one with a proven benchrest pedigree (so you know it's extremely accurate), as long as it was practical for hunting.
I know a few gunsmiths that build a lot of hunting rifles on them and have for years and their clients have nothing but praise for them. Nesika also has a lot of good info at their website and have been great to talk to on the phone. I would obviously recommend them, but I'm also sure some of the others are good choices too. Good luck.
Jeff in ND is your rifle with the drop bolt. I have looked at nesika website and there are a bizillion of options. What is the options on your rifle. Do you think it's worth the $$. Is it a Brown stock on your rifle. What is a 257 DGR?
Cheers
JOHAN
[This message has been edited by JOHAN (edited 02-09-2002).]
Stock is a High Tech Specilities (Rem 700 SA)
Scope is a Leupold 4.54X14X40 with Premiere Reticle Mil Dot.
Rings are Leupold double dovetail
Bases are Leupold, you have to buy to sets as the Nesika uses the spacing of the Rem front base for the front and rear.
Trigger is a tuned Reminton.
Sling is a Ching Sling 3 point shooting sling.
Here is a link to more info on the 257DGR,
http://www.duanesguns.com
The 257DGR is based on a 243Win or 260Rem, necked to 25 caaliber and shoulder pushed back just enough to make the shoulder 30 degrees. Preformance is a bit above the 250 Ackley Improved.
Good Hunting
Jeff in ND
Forgot to say, My rifle was built by Duane Spooner of Duane's Guns (Link above). It shoot very well so far. Loads with various bullets are grouping from .19" to .9" (3 shot). I got it late last summer and did not have time to fine tune a load for peak accuracy but the 3 deer an 1 coyote I shoot with it last fall couldn't tell the differnce.
I expect to find a load with the bullet I want (70 or 80 gr Starke RPVB's), at the velocity I want, and it will shoot consistently @ or under .5" 5 shot groups if I am up to the task.
That is what my other 2 DGR rifles do and they are only on Rem actions:-) Actually my 223Rem DGR rifle is a .25" rifle or better and my 243AI is @ the .5 to .75" range depending on the load.
[This message has been edited by Jeff in ND (edited 02-10-2002).]
quote:
Originally posted by pallladium2506:
I played with a nesika actioned varmint rifle at a gun show a while back and now I'm trying to decide if i should buy one for a hunting rifle or if i should use a sako 75 stainless instead. Any opinions?
Certainly if you have the budget, you could do worse then a Nesika bay action as the basis for a custom rifle. I built up one on a Model J short action, w/ pinned recoil lug, jewel trigger, LV taper fluted barrel w/ fast 1-8 twist, chambered for 6mmBR, single shot, McMillan A-2 tactical stock. I love the rifle. AFIK there is no Jewel trigger for an M75 action. The stock Sako trigger is good but it's no Jewel. That would be one reason to go to the NB action. Another would simply be workmanship. The NB actions are works of art, extremely smooth and as one of my friends commented, "orgasmic". The Jim Borden inspired eliptical bands on the bolt reduce bolt play tolerance to .001". That's pretty cool.
A friend also built a rifle on a stainless M700 long action (.25-06) that is setup similar to mine (jewel, A-4 stock, etc). It honestly performs as well as it would had he chosen to build it on a NB action.
If you have the means, by all means go for the Nesika Bay. You'll never look back and wish you had done it using the Sako M75, I guarantee that.
Regards,
re5513